Philips ftr9965-12s User Manual
19
There is a wide range of audio and video equipment that can be connected to your receiver.
The following connection diagrams show you how to connect them.
The following connection diagrams show you how to connect them.
Note: In case of the monitor in a stand alone situation without the receiver box connected, see the instructions with
the monitor.
Note:
the monitor.
Note:
EXT1
can handle CVBS and RGB,
EXT2
CVBS, Y/C and RGB,
EXT3
and
4
CVBS,
EXT5
Y-Pb-Br. It is preferred
to connect peripherals with RGB output to
EXT1
or
EXT2
as RGB provides a better picture quality.
Note: If your recorder is provided with the EasyLink function, it should be connected to
EXT2
to benefit from the
EasyLink functionality.
Recorder (
VCR
-
DVD
+
RW
)
Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals out of the
display. Keep a minimum distance of 0,5 m to the screen.
display. Keep a minimum distance of 0,5 m to the screen.
Connect the aerial cables 1, 2 and, to obtain the optimum
picture quality, eurocable 3 as shown.
If your recorder does not have a euroconnector, the only possible
connection is via the aerial cable.You will therefore need to tune
in your recorder’s test signal and assign it programme number 0
or store the test signal under a programme number between 90
and 99, see Manual installation, p. 6.
See the handbook of your recorder.
picture quality, eurocable 3 as shown.
If your recorder does not have a euroconnector, the only possible
connection is via the aerial cable.You will therefore need to tune
in your recorder’s test signal and assign it programme number 0
or store the test signal under a programme number between 90
and 99, see Manual installation, p. 6.
See the handbook of your recorder.
Decoder and Recorder
Connect a eurocable 4 to your decoder and to the special
euroconnector of your recorder. See also the recorder handbook.
See Decoder, p. 10. You can also connect your decoder directly to
euroconnector of your recorder. See also the recorder handbook.
See Decoder, p. 10. You can also connect your decoder directly to
EXT1
or
2
with a eurocable.
Other equipment
(satellite receiver, decoder, DVD, games, etc.)
&
Connect the aerial cables 1, 2 and 3 as shown (only if your
peripheral has TV aerial in-/output).
Connect your equipment with a eurocable 4 or 5 to one of
the euroconnectors
peripheral has TV aerial in-/output).
Connect your equipment with a eurocable 4 or 5 to one of
the euroconnectors
EXT1
,
2, 3
or
4
to obtain a better picture
quality.
é
Look for the test signal of your peripheral in the same way as you
do for a recorder.
do for a recorder.
“
Make a selection in the Setup, Source menu, p. 9.
DVD player
With Component Video Output Connectors
(EXTERNAL 5)
&
Connect the three separate component video cables to the DVD
player’s Y, U (Pb) and V (Pr) jacks and to the Y, Pb and Pr jacks
on the receiver.
player’s Y, U (Pb) and V (Pr) jacks and to the Y, Pb and Pr jacks
on the receiver.
é
Connect the audio cable to the DVD player’s
AUDIO L
and
R
jacks and to the
L
and
R AUDIO EXTERNAL 5
jacks on the
receiver.
VCR 1
DECODER
CABLE
1
EXTERNAL
4
2
3
2
EXTERNAL
2
1
VCR 1
CABLE
1
5
2
4
3
2
1
DVD
OUT
EXTERNAL
5
L
R
V
U
Y
Connect Peripheral Equipment
1029.2 en 25-03-2003 15:25 Pagina 19