Philips fw-c330-21m User Manual
25
English
3140 115 29741
Timer setting
The system can switch on to CD, TUNER, or
TAPE mode automatically at a preset time,
serving as an alarm to wake you up.
TAPE mode automatically at a preset time,
serving as an alarm to wake you up.
IMPORTANT!
– Before setting the timer, ensure that the
clock is set correctly.
– The timer will always be switched on
after it has been set.
– The timer will not start if a recording is in
progress.
– The volume of the timer will increase
gradually from the minimum level to the
last tuned volume level.
– Before setting the timer, ensure that the
clock is set correctly.
– The timer will always be switched on
after it has been set.
– The timer will not start if a recording is in
progress.
– The volume of the timer will increase
gradually from the minimum level to the
last tuned volume level.
1
Press and hold
CLOCK•TIMER for more than
two seconds to select timer mode.
➜ "12:00
➜ "12:00
AM
" or "
00:00" or the last timer
setting starts flashing.
➜ starts flashing.
➜ starts flashing.
2
Press
CD 1/2/3, TUNER, TAPE or PROG to
select the desired source.
➜ “CD1 [or 2, 3] XX:XX" indicates the CD
mode is selected.
➜ “TU XX:XX” indicates the Tuner mode is
selected.
➜ “TA1 [or 2] XX:XX” indicates the Tape
mode is selected.
➜ “PROG XX:XX" indicates the CD programme
mode is selected.
➜ “CD1 [or 2, 3] XX:XX" indicates the CD
mode is selected.
➜ “TU XX:XX” indicates the Tuner mode is
selected.
➜ “TA1 [or 2] XX:XX” indicates the Tape
mode is selected.
➜ “PROG XX:XX" indicates the CD programme
mode is selected.
● Before setting timer, make sure the music source
has been prepared.
CD 1/2/3 – Load the disc(s). To start from a
specific track, make a program (refer to “CD
Operation - Programming the disc tracks”).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck.
CD 1/2/3 – Load the disc(s). To start from a
specific track, make a program (refer to “CD
Operation - Programming the disc tracks”).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck.
3
Press à or á on the system repeatedly to set
the hour for the timer to start.
the hour for the timer to start.
4
Press í or ë on the system repeatedly to set
the minute for the timer to start.
the minute for the timer to start.
5
Press
CLOCK•TIMER to store the timer.
➜ "TIMER ON" is displayed, followed by the set
timer "
timer "
XX:XX" and the selected source.
➜ remains on the display.
● At the preset time, the selected sound source
will play.
To exit without storing the setting
● Press Çon the system.
Notes:
– When the preset time is reached and the
selected disc tray is empty, the next available disc
will be selected. If all the disc trays are not
available, Tuner will be selected automatically.
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
– When the preset time is reached and the
selected disc tray is empty, the next available disc
will be selected. If all the disc trays are not
available, Tuner will be selected automatically.
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
Deactivating the timer
1
Press and hold
CLOCK•TIMER for more than
two seconds.
2
Press Ç on the system to cancel the timer.
➜ "CANCEL" is displayed and the disappears.
➜ "CANCEL" is displayed and the disappears.
Activating the timer (for the same preset
time and source)
time and source)
1
Press and hold
CLOCK•TIMER for more than
two seconds.
2
Press
CLOCK•TIMER again to store.
➜ The last set timer information is displayed for
a few seconds and
a few seconds and
is shown.
Sleep timer setting
The sleep timer enables the system to switch to
standby mode automatically at a preset time.
standby mode automatically at a preset time.
1
Press
SLEEP on the remote control repeatedly
to select a preset time.
➜ The selections are as follows (time in
minutes):
➜ The selections are as follows (time in
minutes):
15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120 ™
OFF ™ 15 …
➜ "SLEEP XX" or "OFF" is displayed. "XX" is the
time in minutes.
time in minutes.
Clock/Timer