Philips fw-c100-21m User Manual
18
English
3139 115 20281
Tuner
Notes:
– You can cancel the automatic programming by
pressing PROGRAM or
– You can cancel the automatic programming by
pressing PROGRAM or
Ç (on the system only).
– If you want to reserve a section of preset
numbers, for example preset numbers 1 to 9,
select preset 10 before starting automatic
programming, only the preset numbers 10 to 40
will be programmed.
numbers, for example preset numbers 1 to 9,
select preset 10 before starting automatic
programming, only the preset numbers 10 to 40
will be programmed.
Manual programming
1
Press TUNER (BAND).
2
Press TUNER (BAND) again to select the
desired waveband : FM, MW or LW.
desired waveband : FM, MW or LW.
3
Press PROGRAM for less than one second.
➜ The PROG flag starts flashing.
➜ The next available preset number will be
displayed for selection.
➜ The PROG flag starts flashing.
➜ The next available preset number will be
displayed for selection.
4
Press
à or á to tune to the desired frequency.
¶ If you wish to store the radio station to another
preset number, press
4 or 3 to select the
desired preset number.
5
Press PROGRAM again.
➜ The PROG flag disappears and the radio
station will be stored.
➜ The PROG flag disappears and the radio
station will be stored.
¶ Repeat steps 3 – 5 to store other preset radio
stations.
Notes:
– When 40 radio stations are stored and you
attempt to store another radio station, the display
will show "
– When 40 radio stations are stored and you
attempt to store another radio station, the display
will show "
FULL”. If you want to change an
existing preset number, repeat steps 3 – 5.
– You can cancel manual programming by
pressing
– You can cancel manual programming by
pressing
Ç (on the system only).
– During programming, if no button is pressed
within 20 seconds, the system will exit programme
mode automatically.
within 20 seconds, the system will exit programme
mode automatically.
Tuning to Preset Radio Stations
¶ Press 4 or 3 to select the desired preset
number.
➜ The preset number, radio frequency, and
waveband appear on the display.
➜ The preset number, radio frequency, and
waveband appear on the display.
pg 01-27/C100/22-Eng
12/6/00, 3:18 PM
18