Philips fw-c85-02rw User Manual

17

3139 116 19611

MINI HIFI SYSTEM

PRESET ▲

▲

Note:
– For 'EASY SET' feature, please refer to

page 11.

1 Press TUNER (BAND) to select TUNER

mode.
™ "TUNER" will be displayed.

A few seconds later, the current radio
frequency will be displayed.

2 Press TUNER (BAND) again to select

the desired waveband : FM, MW or LW.

3 Press à or á for more than one

second, then release.
™ The display will show "SEARCH"

until a radio station with sufficient
signal strength is found.

• Repeat this procedure until the desired

station is reached.

• To tune to a weak station, briefly press

à or á repeatedly until the display
shows the desired frequency and/or
when the best reception has been
obtained.

You can store up to 40 radio stations in the
memory. When a preset radio station is
selected, the preset number appears next
to the frequency on the display.

Automatic programming
1 Press TUNER (BAND).
2 Press PROG for more than one second.

™ The 

 starts flashing and

"

AUTO" will be displayed.

™ The system will start searching for all

radio stations with RDS and then
followed by radio stations on FM,
MW and LW band respectively.

™ All available stations will be stored

automatically. The frequency and
preset number will be displayed
briefly.

™ The system  will stop searching when

all the available radio stations are
stored or when the memory for 40
preset radio stations is used.

™ The system will remain tuned to the

last stored preset radio station.

Notes:
– You can cancel the automatic

programming by pressing PROG orÇ
(on the system only).

– If you want to reserve a section of

preset numbers, for example preset
numbers 1 to 9, select preset 10 before
starting automatic programming, only
the preset numbers 10 to 40 will be
programmed.

Manual programming
1 Press TUNER (BAND).
2 Press TUNER (BAND) again to select

the desired waveband : FM, MW or LW.

3 Press PROG for less than one second.

™ The 

 starts flashing.

™ The next available preset number will

be displayed for selection.

4 Press à or á to tune to the desired

frequency.

• If you wish to store the radio station to

another preset number, press 

4 or 3

(or Digit 0-9 on the remote control)  to
select the desired preset number.

5 Press PROG again.

™ The 

 disappears and the

radio station will be stored.

• Repeat 

steps 3 – 5 to store other preset

radio stations.

Notes:
– When 40 radio stations are stored and

you attempt to store another radio
station, the display will show
"

PROGRAM FULL”.  If you want to

change an existing preset number,
repeat steps 3 – 5.

– You can cancel manual programming by

pressing Ç (on the system only).

– During programming,  if no button is

pressed within 20 seconds, the system
will exit program mode automatically.

• Press 

4 or 3 (or Digit 0-9 on the

remote control) to select the desired
preset number.
™ The preset number, radio frequency,

and waveband appear on the display.

pg 01-29/C85-C83/22-Eng

3/6/00, 1:00 PM

17