Philips fwm390-21m User Manual

English

3140 115 31151

Clock/Timer

IMPORTANT!
– When in Eco Power standby mode, it is
not possible to operate the clock or timer
function.
– Use CLOCK•TIMER on the set to set the
clock and timer.
– CLK•TIMER on the remote control allows
you to view the times only.

View clock

The clock (if it is set) will be shown in standby
mode.

To view the clock in any source mode
(CD or TUNER for example)

● Press CLOCK•TIMER (or CLK•TIMER on the

remote control).
➜ The clock is displayed for a few seconds.

➜ If the clock has not been set, "--:--" is
displayed.

Clock setting

The clock can be set in either 12-hour or
24-hour mode ("

AM 12:00" or "00:00" for

example)

In standby or view clock mode, press
CLOCK•TIMER once. In other source mode,
press CLOCK•TIMER twice.

Press PROGRAM repeatedly to select clock
mode.
➜ "AM 12:00" or "00:00" starts flashing.

Press à or á on the system repeatedly to set
the hour.

Press í or ë on the system repeatedly to set
the minute.

Press CLOCK•TIMER again to store the
setting.

➜ The clock starts working.

To exit without storing the setting

● Press Çon the system.

Notes:
– The clock setting will be cancelled when the
power cord is disconnected or if a power failure
occurs.
– During clock setting, if no button is pressed
within 90 seconds, the system will exit clock setting
mode automatically.
– To set the clock automatically through the time
information in the RDS signal, refer to "Radio
Reception - Setting the RDS clock".