The plug must never be used without the fuse
cover being in place.
If a replacement fuse cover is required it must
be of the same type or colour as the coloured
insert around the fuse cover.
Only fit a 13 Ampere BSI or ASTA BS 1362
approved replacement fuse. Always refit the
fuse cover after changing the fuse.
Replacement fuse covers are available from
Electrical Retailers or direct from Philips,
tel. no. 081 - 689 - 2166 Ext. 8014.

If the moulded plug is not suitable for the
socket in your home it can be removed and
replaced by a plug of the correct type.
The moulded plug must be cut from the mains
cord, the fuse removed, and the plug safely
discarded to prevent further use. The removed
plug can be hazardous if inserted into a live
mains socket.

Wiring Instructions U.K

WARNING - THIS APPLIANCE MUST BE

EARTHED

The wires in this mains lead are coloured in
accordance with the following code:

GREEN AND YELLOW -

EARTH

BLUE

NEUTRAL

BROWN

LIVE

As the colours of the wires in the mains lead of
this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
The wire which is coloured GREEN AND
YELLOW must be connected to the terminal
which is marked with the letter "E" or by the
earth symbol

or coloured GREEN or

GREEN AND YELLOW.
The wire which is coloured BLUE must be
connected to the terminal which is marked with
a letter "N" or coloured BLACK.
The wire which is coloured BROWN must be
connected to the terminal which is marked with
the letter "L" or coloured RED.
Note: If the terminals of the plug are
unmarked or if you are in any doubt
consult a qualified electrician.
If a 13 amp. plug is used this must be fitted
with a 13 amp. fuse.