Philips hdd082-07b User Manual
32
Device Repair
Your device is controlled by an internal program called firmware. In case your device has a problem,
or you wish to format the device, you may need to repair it.
or you wish to format the device, you may need to repair it.
1
Connect your device to your computer (powered by the supplied AC/DC adapter).
2
Launch Device Manager User Interface by right-clicking on this
icon in the
taskbar and selecting "Launch Device Manager" or by going to
Start ➔ Programs ➔ Philips Device Manager
Start ➔ Programs ➔ Philips Device Manager
3
In the main window, go to the repair tab and click Repair.
4
You will be prompted before repair begins.
TIP
Please charge your device fully before device repair. This will ensure
steady power supply for completing the whole process.
Please charge your device fully before device repair. This will ensure
steady power supply for completing the whole process.
✔
5
Click OK to continue. Click Cancel to stop.
6
The Device Manager will repair your device. Once the repair is complete,
the device can be disconnected from the PC and is ready to be used again.
ATTENTION!
All media contents will be erased!
All media contents will be erased!
WMP_ENG_Charge_P17_P18_B 1/9/05 11:04 Page 32