Philips horizon mcs 130 surround User Manual
21
The recorder (VCR or DVD+R(W)) or DVD can
be operated with the remote control via the
Recorder
be operated with the remote control via the
Recorder
or
DVD
menu on screen.
&
Press the
MENU
key on the remote control.
é
Select the Recorder or
DVD
menu with the
cursor up/down.
“
Press the cursor left/right, up/down to select
one of the recorder or DVD functions.
one of the recorder or DVD functions.
The key ® for recording can be operated in the TV
mode.
If your EasyLink recorder has the system standby
function, when you press the B key for 3 seconds,
both TV and the recorder are switched to standby.
mode.
If your EasyLink recorder has the system standby
function, when you press the B key for 3 seconds,
both TV and the recorder are switched to standby.
Ò
p
‡
π † ® Ï
Rwd
Play Stop Play
Ffw Rec Eject
Recorder
Ò
p
‡
π † Ï
Prev. Play
Stop
Play
Next
Eject
DVD
REAR
multimedia loudspeakers
&
Select Surround speakers On in the Setup
menu, see p. 8.
menu, see p. 8.
é
Connect the audio cables to the rear
loudspeakers and to the Dolby Surround
output
loudspeakers and to the Dolby Surround
output
SURROUND OUT
at the back of your
TV. There is only one output for both
speakers.
speakers.
“
Adjust the volume of the rear loudspeakers.
Use the Test tone function in the Speakers
menu, see p. 8.
Note: Once you have adjusted the volume of the
rear loudspeakers, do not change it while watching
TV as the whole configuration operates with the
volume adjustment of your TV.
Use the Test tone function in the Speakers
menu, see p. 8.
Note: Once you have adjusted the volume of the
rear loudspeakers, do not change it while watching
TV as the whole configuration operates with the
volume adjustment of your TV.
(Analogue) Multichannel surround receiver
&
Connect a MultiChannel surround receiver to
the
the
AUDIO OUT R
and
L
connectors at the
back of your TV.
é
If you want the loudspeakers of your TV to act
as centre speaker, also connect an audiocable
to the MultiChannel surround receiver
as centre speaker, also connect an audiocable
to the MultiChannel surround receiver
CENTRE OUT
connector and to the
CENTRE
IN
connector at the back of your TV.
“
Select Centre input On in the Source menu.
See p. 10.The loudspeakers of the TV will now
only produce centre sound.
See p. 10.The loudspeakers of the TV will now
only produce centre sound.
‘
If necessary, adjust the volume level of the
centre sound in the Centre in volume menu
item of the Source menu.The overall volume
has to be controlled via the MultiChannel
surround receiver.
centre sound in the Centre in volume menu
item of the Source menu.The overall volume
has to be controlled via the MultiChannel
surround receiver.
See the separate supplied Cinema Link instruction manual.
Attention: the sound info on screen will not correspond with the actual sound reproduction.
Press the v key on the remote control repeatedly to select
EXT1
,
EXT2
,
EXT3
,
EXT4
or
SIDE
according to where you connected your equipment at the back or the right side of your TV.
Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.
To select connected equipment
Cinema Link surround receiver
Recorder or DVD with EasyLink
Connect extra loudspeakers/amplifier
2229.1 gb 12-03-2003 09:55 Pagina 21