Philips HP4883 User Manual

Keep this appliance away from water! Do not use this product near

or over water contained in baths, washbasins, sinks etc. When used

in a bathroom, unplug the appliance after use since the proximity of

water presents a risk, even when the hairdryer is switched off.

For additional protection, we advise you to install a residual current

device (RCD) with a rated residual operating current not

exceeding 0mA in the electrical circuit supplying the bathroom.

Ask your installer for advice.

Keep the appliance out of the reach of children.

Never block the air grilles.

If the appliance overheats, it will switch off automatically. Unplug

the appliance and let it cool down for a few minutes. Before you

switch the appliance on again, check the grilles to make sure they

are not blocked by fluff, hair, etc.

Always switch the appliance off before putting it down, even if it is

only for a moment.

Always unplug the appliance after use.

Do not wind the mains cord round the appliance.

You may notice a characteristic odour when using this hairdryer.

This is caused by the ions that are generated and it is not harmful

to the human body.

Do not probe the ion generator with metal objects.

Noiselevel: Lc = 8 dB(A)

using the appliance

Drying

Put the plug in the wall socket.

Switch the appliance on by selecting the desired airflow setting:

Set the slide switch to airflow setting II for ultra-quick drying.

Set the slide switch to airflow setting I for drying short hair or styling

your hair.

You can also use the Jet position of the JetSet switch for an extra-

powerful airflow. (Fig. 2)

EnglisH