Philips hr2860 User Manual

Wet mill
The wet mill is intended for chopping moist ingredients such as meat,

onions, garlic etc (Fig. 6).

The wet mill is not suitable for chopping dry ingredients such as coffee

beans and dried beans.
Do not use the wet mill to mix liquids or to crush ice cubes. Use the 

blender to process these ingredients.

Do not touch the sharp blades. If the blades get stuck, switch off the 

appliance and disassemble the wet mill beaker. Use a spatula to remove 

the ingredients that block the blades.

 1 

 Cut the ingredients into smaller pieces (approx. 1-cm) and put 

them in the wet mill beaker.  (Fig. 11)

Do not fill the wet mill beaker beyond the MAX indication.

See the table for the recommended quantities.

Ingredients wet mill

Quantities

pre-soaked seeds and grains (e.g. lotus

seeds, rice)

20-50g

spice paste ingredients (chilli, onion,

parsley etc.)

50g

garlic

20-50g

onions

20-50g

  

 Turn the assembled wet mill upside down and place it on the 

motor unit (1). Turn the wet mill clockwise to fasten it () 

(‘click’) (Fig. 1).

  

 Put the plug in the wall socket and press the on/off button.  (Fig. 10)

Hold the motor unit firmly with both hands when the appliance operates.
Do not operate the wet mill for more than 0 seconds at a time.

-

1