Philips lx8200sa-22s User Manual
25
English
Radio Reception
R
ADIO
R
ECEPTION
Plug and Play
Plug and Play allows you to store all available RDS stations
and radio stations automatically.
and radio stations automatically.
First time setup / power up
1
When you turn on the power, "
AUTO INSTALL – PRESS
PLAY" is displayed.
2
PressÉÅ on the system to start installation.
➜ "INSTALL TUNER" is displayed, followed by "AUTO
➜ "INSTALL TUNER" is displayed, followed by "AUTO
PROGRAM".
➜ The system will automatically store the radio stations
with sufficient signal strength, starting from FM band and
followed by MW band. Weak radio stations may be stored
in later presets.
➜ When all the available radio stations are stored or the
memory for 40 presets are used, the last preset radio
station (or the first available RDS station) will be played.
with sufficient signal strength, starting from FM band and
followed by MW band. Weak radio stations may be stored
in later presets.
➜ When all the available radio stations are stored or the
memory for 40 presets are used, the last preset radio
station (or the first available RDS station) will be played.
3
If the first preset is an RDS station, the system will
proceed to set the RDS clock.
➜ "INSTALL TIME" is displayed, followed by "SEARCH
proceed to set the RDS clock.
➜ "INSTALL TIME" is displayed, followed by "SEARCH
RDS TIME".
➜ When RDS time is read, "RDS TIME" is displayed and
the current time will be stored.
➜ If RDS station does not transmit RDS time within 90
seconds, the programme will exit automatically and the
display will show “
the current time will be stored.
➜ If RDS station does not transmit RDS time within 90
seconds, the programme will exit automatically and the
display will show “
NO RDS TIME”.
● If the first preset is non-RDS station;
➜ The programme will exit automatically.
To reinstall the Plug and Play
1
In standby mode, hold downÉÅ
on the system until
"
AUTO INSTALL - PRESS PLAY" is displayed.
2
PressÉÅ
again to start installation.
➜ All previously stored radio stations will be replaced.
To exit the Plug and Play
● Press Ç on the system.
➜ If you do not complete the Plug and Play installation, the
function will be restarted when you turn on the power
again.
function will be restarted when you turn on the power
again.
Notes:
– If no stereo frequency is detected during Plug and Play,
"
– If no stereo frequency is detected during Plug and Play,
"
CHECK ANTENNA" will be displayed.
– During Plug and Play, if no button is pressed within 15
seconds, the system will exit Plug and Play mode.
seconds, the system will exit Plug and Play mode.
Tuning to radio stations
1
Press
SOURCE to select TUNER mode (or TUNER on
the remote control.
2
Press
TUNER again to select the desired band : FM or
MW.
3
Hold down
S or T until the frequency indication
starts to change, then release.
➜ The system automatically tunes to the next strong signal
radio reception.
➜ The system automatically tunes to the next strong signal
radio reception.
● To tune to a weak station, press S or T briefly
and repeatedly until an optimal reception is found.
4
Repeat
step 3 if necessary until you find the desired radio
station.
Presetting radio stations
You can preset up to 40 radio stations in the memory.
Automatic preset from a desired preset
number
number
1
In tuner mode, press
1 or 2 or use the numeric keypad
(0-9) to select the desired preset number.
2
Hold down
PROG until “
AUTO PROGRAM” is displayed.
➜ If a radio station has been stored in one of the presets,
it will not be stored again under another preset number.
➜ If no preset number is selected, automatic preset will
begin from preset (1) and all your former presets will be
overridden.
it will not be stored again under another preset number.
➜ If no preset number is selected, automatic preset will
begin from preset (1) and all your former presets will be
overridden.
To exit the preset setting
● Press PROG or Ç on the system.
Manual preset of favourite radio stations
1
Tune to your desired radio station (refer to “Tuning to radio
stations”).
stations”).
2
Press
PROG twice.
➜ The preset number starts flashing.
3
Press
1 or 2 or use the numeric keypad (0-9) on the
remote control to select the desired preset number.
4
Press
PROG again to store the radio station.
● Repeat steps 1–4 to store other radio stations.
5
To exit, press Ç.
Notes:
– If you attempt to programme more than 40 preset radio
stations, "
– If you attempt to programme more than 40 preset radio
stations, "
PROGRAM FULL" is displayed.
– During programming, if no key is pressed within 15
seconds, the system will exit the programme mode
automatically.
seconds, the system will exit the programme mode
automatically.