Philips lx7500r-01 User Manual
Adjusting the volume of all
speakers
●
Press VOL+ or VOL– or turn VOLUME on the DVD
recorder system to adjust the volume.
recorder system to adjust the volume.
➜
VOLUME and the actual volume level are displayed.
0
0
To switch off the sound on the DVD recorder system,
press MUTE.
press MUTE.
➜
MUTE is displayed.
0
0
To switch the sound on again, press MUTE again.
0
0
To switch off the sound on your Philips TV,
press MUTE while you press and hold SHIFT.
press MUTE while you press and hold SHIFT.
Adjusting the volume of the rear
speakers and of the subwoofer
●
While you press and hold SHIFT:
Adjust the subwoofer volume with 2 / SUB+ and 5 / SUB–.
Adust the rear volume with 8 / REAR+ and 0 / REAR–.
Adjust the subwoofer volume with 2 / SUB+ and 5 / SUB–.
Adust the rear volume with 8 / REAR+ and 0 / REAR–.
Adjusting bass and treble
●
While you press and hold SHIFT:
Adjust the bass with 1/ BASS+ and 4 / BASS–.
Adjust the treble with 3 / TREBLE+ and 6 / TREBLE–.
Adjust the bass with 1/ BASS+ and 4 / BASS–.
Adjust the treble with 3 / TREBLE+ and 6 / TREBLE–.
Loudness
Loudness enhances bass and treble at low volume.
●
While you press and hold SHIFT: Press 7 / LOUDNESS
repeatedly to switch loudness on or off.
repeatedly to switch loudness on or off.
➜
LOUDNESS ON or OFF is displayed on the DVD
recorder system.
recorder system.
Volume balance between the
speakers
If a speaker appears too loud or too quiet in comparison to
the rest of the speakers, you can adjust the volume balance
between the speakers.
the rest of the speakers, you can adjust the volume balance
between the speakers.
1
Press and hold DVD/MON for 1 second.
2
Press SYSTEM MENU.
3
Press
1 as often as necessary to select A.
4
Press
4 or 3 as often as necessary to select
y
Installation. Next, press
2 to confirm.
5
Press
4 or 3 as often as necessary to select
Audio setup. Next, press
2 to confirm.
6
Press
4 to select Speaker balance. Next, press 2 to
confirm.
➜
Test tone is highlighted.
7
Press
2 as often as necessary to select Yes.
➜
The test tone is played on each speaker for a short time.
Note:The test tone is not available for adjusting the subwoofer
volume.
volume.
8
Press
4 or 3 as often as necessary to select the speaker
which appears too quiet or too loud: Front left, Front
right, Center, Rear left, or Rear right.
right, Center, Rear left, or Rear right.
9
Press
1 or 2 repeatedly to adjust the volume of the
selected speaker (values between -6 and +6).
10
Press OK to store the setting or SYSTEM MENU to exit
without storing.
without storing.
0
0
To adjust the volume of another speaker, repeat steps 8–10.
11
Press SYSTEM MENU to end.
Note: If you did not connect the centre or the rear speakers,
please change the speaker settings in chapter “Speaker setup”
on page 55 accordingly.
please change the speaker settings in chapter “Speaker setup”
on page 55 accordingly.
Volume and sound
20
English
Test tone
< On >
Front left
< +1
>
Front right
< +1
>
Center
<
0
>
Rear left
<
0
>
Rear right
<
0
>
Subwoofer
<
0
>
To exit press
SYSTEM MENU
Audio setup
Speaker balance