Philips lx7500r-01 User Manual
Checking, changing or deleting a
timer recording
1
Switch your TV set on. If necessary set the TV to the
correct audio/video channel. Such channels may be called
AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc.These channels are often near
channel 00.
correct audio/video channel. Such channels may be called
AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc.These channels are often near
channel 00.
2
Press and hold DVD/MON for 1 second.
3
Press TIMER.
4
Press
4 or 3 as often as necessary to select the line
Timer List.
5
Press
2 to confirm the selection.
6
Press
4 or 3 as often as necessary to select the timer
recording to be checked, changed or deleted.
7
If you want to check or change the timer recording:
Press
Press
2 again.
Use
1 or 2 to select the input field to be checked or
changed.
Use
4, 3 or the numerical buttons to change the desired
data.
Press OK to store the changed data.
If you want to delete the timer recording:
Press CLEAR.
Press CLEAR.
➜
Clear timer is displayed.
Press OK to start deleting.
➜
Timer Cleared is displayed briefly, the programmed
recording data disappear and are replaced by -----.
recording data disappear and are replaced by -----.
8
Press TIMER to end.
Automatic recording from a
satellite receiver
This feature can be used only if you own a satellite receiver
that can control other equipment via a scart cable and a
programming feature (timer). For more information, please
see the user manual of the satellite receiver.
that can control other equipment via a scart cable and a
programming feature (timer). For more information, please
see the user manual of the satellite receiver.
1
Make sure your satellite receiver is connected to EXT-2
AUX I/O with an RGB capable Scart cable, i. e. a Scart
cable with all “pins” wired.
AUX I/O with an RGB capable Scart cable, i. e. a Scart
cable with all “pins” wired.
2
Press and hold DVD/MON for 1 second.
3
Press SYSTEM MENU.
4
Press
1 as often as necessary to select A.
5
Press
4 or 3 as often as necessary to select z Record
settings. Next, press
2 to enter the menu.
6
Press
4 or 3 as often as necessary to select the line Sat
record.
7
Use
1 or 2 to select EXT2.
0
0
To switch off automatic recording from a satellite receiver
use
use
1 or 2 to select Off.
8
Press OK to confirm the selection.
9
Press SYSTEM MENU to end.
10
Load a disc on which you want to record in the tray.
11
On a DVD+RW press
3 or 4 repeatedly to select an
empty title that has enough time for the recording.To
prevent overwriting of previous recordings, select the
empty title after the last recording.
On a DVD+R this not necessary because previous
recordings cannot be overwritten.
prevent overwriting of previous recordings, select the
empty title after the last recording.
On a DVD+R this not necessary because previous
recordings cannot be overwritten.
12
Programme the satellite receiver for recording (programme
number of the TV channel, start time, end time). If necessary,
see the instruction manual of the satellite receiver.
number of the TV channel, start time, end time). If necessary,
see the instruction manual of the satellite receiver.
13
Press 2 to switch off the DVD recorder system.
➜
SAT
is displayed on the DVD recorder system. The DVD
recorder system is now ready to record.The satellite
receiver connected to EXT-2 AUX I/O will control the
beginning and end of the recording.
receiver connected to EXT-2 AUX I/O will control the
beginning and end of the recording.
The satellite receiver will control the recording only if
the DVD recorder system is switched to standby.
the DVD recorder system is switched to standby.
Timer recording
36
English
Record mode
M2
Direct Record
On
Sat record
EXT2
Auto chapters
On
Filter mode
Stndrd
To exit press
SYSTEM MENU
SYSTEM MENU
Record settings