Philips mc-130-21m User Manual

19

3140 115 30061

AMPLIFIER
Output power .......................................... 2 x 5 W RMS

......................................................................... 200 W  PMPO

Signal-to-noise ratio ..........................

≥ 65 dBA (IEC)

Frequency response ......... 40 – 20000 Hz, 

± 3 dB

Input sensitivity AUX ....................... 0.5 V (max. 2 V)
Impedance loudspeakers ......................................... 8 

Ω

Impedance headphones ................. 32 

Ω – 1000 Ω

CD PLAYER
Frequency range .................................. 20 – 20000 Hz
Signal-to-noise ratio ............................................ 75 dBA

TUNER
FM wave range ................................... 87.5 – 108 MHz
MW wave range (9 kHz) ............. 531 – 1602 kHz
MW wave range (10 kHz) ........... 530 – 1700 kHz
Tuning grid ............................................................ 9/10 kHz
Sensitivity at 75 

Ω

– mono, 26 dB signal-to-noise ratio ............ 2.8 

µV

– stereo, 46 dB signal-to-noise ratio ........ 61.4 

µV

Selectivity .................................................................

≥ 28 dB

Total harmonic distortion .....................................

≤ 5%

Frequency response ..... 63 – 12500 Hz (

± 3 dB)

Signal-to-noise-ratio ......................................

≥ 50 dBA

TAPE DECK
Frequency response

Normal tape (type I) ... 120 – 10000 Hz (8 dB)

Signal-to-noise ratio

Normal tape (type I) ....................................  48 dBA

Wow and flutter .........................................

≤ 0.4% DIN

SPEAKERS
Bass reflex system
Dimensions (w x h x d) . 140 x 231 x 202 (mm)

GENERAL INFORMATION
AC Power

For Version /21-/21M ..... 110–127 / 220–240 V;

50–60 Hz Switchable

For Version /30 ........................ 230 – 240 V; 50 Hz

Dimensions (w x h x d) .. 140 x 231 x 280 (mm)
Weight (with/without speakers) ..................................

............................................................... approx. 5.7 / 2.7 kg

Standby power consumption .......................... < 3 W

● Use a soft cloth slightly moistened with a mild

detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.

● When a disc becomes dirty,

clean it with a cleaning cloth.
Wipe the disc from the centre
out.

● Do not use solvents such as

benzene, thinner, commercially
available cleaners, or antistatic spray intended for
analogue records.

● After prolonged use, dirt or dust may

accumulate at the disc lens. To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.

● To ensure good recording and playback quality,

clean the heads 

A

, the capstan(s) 

B

, and

pressure roller(s) 

C

 after every 50 hours of

tape operation.

● Use a cotton swab slightly moistened with

cleaning fluid or alcohol.

● You can also clean the heads by playing a

cleaning tape once.

● Use a demagnetising tape available at your

dealer.