Philips mc160-21m User Manual
19
English
3141 075 20021
Clock/Timer
Setting the timer
● The system can be used as an alarm clock,
whereby the CD or TUNER is switched on at a
set time. The clock time needs to be set first
before the timer can be used.
set time. The clock time needs to be set first
before the timer can be used.
● During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
automatically.
1
In any mode, press TIMER ON•OFF for more
than 2 seconds.
than 2 seconds.
2
Turn VOLUME clockwise (or press SELECT
SOURCE) to select sound source.
SOURCE) to select sound source.
3
Press TIMER ON•OFF to confirm your
desired mode.
➜ The selected source
desired mode.
➜ The selected source
CD
or
TUNER
TUNER
is shown. The clock digits for the hours flash.
4
Turn VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
hours up; anti-clockwise for hours down.
5
Press TIMER ON•OFF again.
➜ The clock digits for the minutes flash.
➜ The clock digits for the minutes flash.
6
Turn VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
minutes up; anti-clockwise for minutes down.
7
Press TIMER ON•OFF to confirm the time.
➜ The timer is now set and activated.
➜ The timer is now set and activated.
Activating and deactivating
TIMER
TIMER
● In standby or during playback, press
TIMER ON•OFF once.
➜ Display shows
➜ Display shows
TIMER
if activated, and
disappears if deactivated.
Setting the clock
There are two possible methods for setting the
clock: manually or automatically by using RDS.
clock: manually or automatically by using RDS.
Automatic clock setting (RDS versions
only)
only)
1
Tune to a RDS station (see Radio Reception).
2
Press CLOCK SET for more than 2 seconds.
➜ SEARCH RDS TIME is displayed for a
maximum of 90 seconds; the time is then
displayed.
➜ NO RDS TIME is displayed if no time signal
has been received and you will have to set the
clock manually.
➜ SEARCH RDS TIME is displayed for a
maximum of 90 seconds; the time is then
displayed.
➜ NO RDS TIME is displayed if no time signal
has been received and you will have to set the
clock manually.
Manual clock setting
1
In standby, press CLOCK SET.
➜ The clock digits for the hours flash.
➜ The clock digits for the hours flash.
2
Turn VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
hours up; anti-clockwise for hours down.
3
Press CLOCK SET again.
➜ The clock digits for the minutes flash.
➜ The clock digits for the minutes flash.
4
Turn VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
minutes up; anti-clockwise for minutes down.
5
Press CLOCK SET to confirm the time.
Note:
– The backlight for clock display is dim in standby.
– The backlight for clock display is dim in standby.