Philips mrd120-17b User Manual

Page of 40
13
8239 300 30533
Viewing and listening to the playback
1
Connect the VCR or Cable / Satellite Box
to the TV as shown.
2
Connect the DVD system’s 
AUDIO IN-
AUX jacks to the AUDIO OUT jacks on
the VCR or cable/satellite box.
Before starting operation, press 
AUX on
the remote to select “
AUX” in order to
activate the input source.
Using the VCR for recording DVD
playback
3
Connect the DVD system’s 
VIDEO
OUT jack to the VIDEO IN jack on the
VCR.
4
Connect the DVD system’s 
LINE OUT
jacks
 to the AUDIO IN jacks on the VCR.
This will allow you to make analog stereo
(two channel, right and left) recordings.
To view DVD playback while
recording
, you must connect the DVD
system to your TV using S-VIDEO (as
shown above) or Component
(Pr/Cr Pb/Cb  Y) video connection.
Connections (optional)
Connecting a VCR or
Cable/Satellite Box
FRONT
RIGHT
FRONT
LEFT
REAR
RIGHT
REAR
LEFT
SUBWOOFER
FRONT
CENTER
TO TV
VIDEO
OUT
IN
AUDIO
S-VIDEO
IN
1
2
4
3
VCR or
Cable / Satellite Box
Digital Recording
Connect the DVD system’s 
DIGITAL
OUT-COAXIAL jack to the DIGITAL
COAXIAL IN jack on a digital recording
device (such as Dolby Digital decoder,
CD recorder.)
Before starting operation, set the
DIGITAL OUTPUT according to the
audio connection.  (See page 26 “Setting
the digital output”.)
Helpful Hints:
– Some DVDs are copy-protected.  You
cannot record the disc through a VCR or
digital recording device.
– Always refer to the owner’s manual of the
other equipment for complete connection
and usage details.
FRONT
RIGHT
FRONT
LEFT
REAR
RIGHT
REAR
LEFT
SUBWOOFER
FRONT
CENTER
DIGITAL IN
Connecting digital audio
equipment
(for example)
CD Recorder
001-037-MRD120-37-Eng
18/03/2004, 02:19 PM
13