Philips mrd120-17b User Manual

8239 300 30533

Step 3: Setting the speakers

You can adjust the delay time (center and
rear speakers only) and volume level for
individual speakers. These adjustments let
you optimize the sound according to
your surroundings and setup.

Test Tone - Turning on/off

If you have turned on the test tone, the
test signal will be automatically generated
to help you judge the sound level of each
speaker.

In disc mode, press

SYSTEM MENU.

➜

Use the 1

2 3 4 keys on the remote

to navigate in the menu.

Highlight

icon and press 4.

Move to

and press 2.

Move to {TEST TONE} and press 2.

OFF
ON

DIGITAL OUT

CNTR DELAY

NIGHT MODE

REAR DELAY

TEST TONE

TEST TONE

Press 34 to select a setting.

Adjusting the delay time

Press 34 to highlight one of the options
below at a time, then press 2.

DIGITAL OUT

CNTR DELAY

NIGHT MODE

REAR DELAY

TEST TONE

SET CENTER DELAY

OFF 5ms

{CNTR DELAY}

– Select this to set the

delay time in relation to the listening
position/distance for the center speaker
(5ms, 3ms, 2ms, 1ms or OFF.)

{REAR DELAY}

– Select this to set the

delay time in relation to the listening
position/distance for rear speakers (15ms,
12ms, 9ms, 6ms, 3ms or OFF.)

Press 1 2 to adjust the settings that
best suit your surround sound needs.

Press

OK to confirm.

Helpful Hint:
– Use longer delay time settings when the
rear speakers are closer to the listener than
the front speakers.

Adjusting the speaker output levels

You can adjust the rear speakers, center
speaker and subwoofer output levels by
comparing the sound from the front
speakers.

●

Press the respective buttons on the
remote (

REAR

+-, CENTER +-

and

SUBW

+-) to adjust the output

level between -15dB ~ 10dB.

Helpful Hint:
– If you have selected Stereo mode,
adjusting the center and rear speakers’
volume level will have no effect.

Getting Started

TIPS:

To return to the previous menu, press

To remove the menu, press

SYSTEM MENU.

001-037-MRD120-37-Eng

18/03/2004, 02:19 PM