Philips mx6000i-22s User Manual
Connecting to power supply
The type plate is located on the rear of the set.
1
Check whether the power voltage as shown on the type
plate corresponds to your local power voltage. If it does
not, consult your dealer or service organisation.
plate corresponds to your local power voltage. If it does
not, consult your dealer or service organisation.
2
Make sure all connections have been made before
switching on the power supply.
switching on the power supply.
3
Connect the supplied power cable to MAINS ~ at the rear
of the Streamium System and to the wall socket.
of the Streamium System and to the wall socket.
For users in the U.K.: please follow the instructions on
page 2.
page 2.
When the set is switched to standby, it is still consuming
some power. To disconnect the set from the power
completely, remove the power plug from the wall
socket.
some power. To disconnect the set from the power
completely, remove the power plug from the wall
socket.
To avoid overheating of the set a safety circuit has
been built in.Therefore your set may disconnect
under extreme conditions. If this happens, unplug the
set and let it cool down before reusing it.
been built in.Therefore your set may disconnect
under extreme conditions. If this happens, unplug the
set and let it cool down before reusing it.
Switching on the system
●
Press STANDBY-ON on the Streamium System or one
of the source buttons on the remote control (DVD,TV,
TUNER, AUX, INTERNET, PC LINK) to switch on the
Streamium System.
of the source buttons on the remote control (DVD,TV,
TUNER, AUX, INTERNET, PC LINK) to switch on the
Streamium System.
Selecting a source
●
Turn SOURCE on the Streamium System or press DVD,
INTERNET, PC LINK,TUNER,TV or AUX on the remote
control to select a source.
INTERNET, PC LINK,TUNER,TV or AUX on the remote
control to select a source.
➜
The selected source will be displayed.
On the remote control:
– To select disc 1, 2, … 5, press DVD repeatedly.
– To select equipment connected to AUX IN or
– To select disc 1, 2, … 5, press DVD repeatedly.
– To select equipment connected to AUX IN or
DIGITAL IN on the Streamium System, press AUX
repeatedly.
repeatedly.
Switching to Eco Power standby
●
Press STANDBY-ON on the Streamium System or 2 on
the remote control.
the remote control.
➜
The STANDBY-ON button will light up on the system.
➜
The display screen will go blank.
Note:The Streamium System will switch to Standby
automatically after 20 minutes of no activities, if “Sleep timer”
is switched on in the System Menu and DVD or INTERNET are
selected.
automatically after 20 minutes of no activities, if “Sleep timer”
is switched on in the System Menu and DVD or INTERNET are
selected.
Connecting …
14
English
AM
FM
ANTENNA
to TV
MENU
MENU
SYSTEM
DISC
SUBTITLE
ANGLE
ZOOM
AUDIO
FAVORITES
(UN) MARK
VIEW
TV
AUX
DVD
INTERNET
PC LINK
TUNER