Philips mx6000i-37 User Manual
The following settings optimize the connection between
the Streamium System and the TV.
the Streamium System and the TV.
Check if you see a picture
1
Switch on your TV.
2
Press AUX on the remote control.
3
Next, press SYSTEM MENU on the remote control.
4
If necessary set the TV to the correct audio/video channel
for the Streamium System. Such channels may be called
AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc.These channels are often near
channel 00. If you are using an RF modulator, select the
channel for the RF modulator.
for the Streamium System. Such channels may be called
AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc.These channels are often near
channel 00. If you are using an RF modulator, select the
channel for the RF modulator.
➜
The system menu of the Streamium System should
appear on the TV.
No picture or distorted picture
The Streamium System may be set to the wrong video
signal. Observe the display on the Streamium System.
signal. Observe the display on the Streamium System.
1
If necessary, press AUX on the remote control. Next, press
SYSTEM MENU.
SYSTEM MENU.
2
Press
4 repeatedly to select P
ICTURE
. Next press
2.
3
Press
4 repeatedly to select TV S
ETTINGS
. Next, press
2.
4
Press
4 repeatedly to select V
IDEO
O
UTPUT
.
Next, press
2.
5
Press
4 or 3 repeatedly to select
– Y PB PR (C
OMPONENT
V
IDEO
) if you have connected
the TV to COMPONENT P
R
P
B
Y on the Streamium
System,
– CVBS if you have connected the TV to CVBS or S-Video
on the Streamium System.
6
Press
2OK to confirm the setting.
7
Next, press SYSTEM MENU to exit the system menu.
TV Shape
You may set the Streamium System to display a DVD movie
in one of three formats: Letterbox, Panscan, or Widescreen.
The TV Shape you select must be supported by the movie.
If not, the TV Shape settings will not affect the picture.
in one of three formats: Letterbox, Panscan, or Widescreen.
The TV Shape you select must be supported by the movie.
If not, the TV Shape settings will not affect the picture.
1
Press SYSTEM MENU on the remote control.
2
DVD: Use
1, 2, 3 or 4 to select Setup
➜
TV
➜
TV Shape
.
INTERNET, PC LINK, AUX: Use
1, 2, 3 or 4 to select
Picture
➜
TV Settings
➜
TV Shape
.
3
Press
2 to enter the menu and 4 to select
– 4:3 Letterbox if you have a
regular TV and the picture will have
black bars at the top and bottom
of the screen,
black bars at the top and bottom
of the screen,
– 4:3 Panscan if you have a
regular TV and both sides of
the picture will be trimmed
to fit your TV screen,
the picture will be trimmed
to fit your TV screen,
– Widescreen if you have a
widescreen TV.
Note: Some widescreen TVs may show only part of the System
Menu.This is not an error of the Streamium System settings.
Adjust the screen mode on your TV. See your TV owner’s manual
for details.
Menu.This is not an error of the Streamium System settings.
Adjust the screen mode on your TV. See your TV owner’s manual
for details.
Settings for the TV
17
English
Use
± or ≠ to select other options, = to enter the option
NTSC
Surround R Size
TV
View
Program
DVD
Stop
TV shape
Video output
4:3 Panscan
4:3 Letterbox
Widescreen
TV shape
Setup