Philips pdcc-js-jw-0807 User Manual
1
2
3
4
In standby mode, press and hold
CLOCK
on the remote control.
When the hour digits flash, press
VOLUME-/+
(
VOL+/-
on the remote control) to set the
hours.
Press
CLOCK
again and the minute digits flash. Then press
VOLUME-/+
(
VOL+/-
on the
remote) to set the minutes.
Press
CLOCK
again to confirm the time setting.
Setting the clock
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support progressive
signals or the cables are not connected accordingly, see the user manual for proper progressive
scan setup or deactivate the progressive scan feature as below:
1) Turn off your TV progressive scan mode or turn on to interlaced mode.
2) Press SYSTEM MENU on the remote to exit the system menu and then DISC and “1” to exit
progressive scan.
If the progressive scan feature is activated but the connected TV does not support progressive
signals or the cables are not connected accordingly, see the user manual for proper progressive
scan setup or deactivate the progressive scan feature as below:
1) Turn off your TV progressive scan mode or turn on to interlaced mode.
2) Press SYSTEM MENU on the remote to exit the system menu and then DISC and “1” to exit
progressive scan.
Tip
See chapters "Preparations" and "System
Menu Options" in the User Manual for
detailed descriptions.
Menu Options" in the User Manual for
detailed descriptions.
SLOW
ANGLE
RDS
DISPLAY
MUTE
STANDBY-ON
DIVX (R) VOD
3D
DIGITAL AUDIO SETUP
ANALOG AUDIO SETUP
PICTURE SETTING
MCD289 QUG_Eng-58
2008.3.19, 16:18
3