Philips pdcc-zyl-0811 User Manual

16

     

1

Push to open the battery tray.

2

Replace a new battery according to the
indicated polarity.

3

Push the battery tray back to close it.

1

Aim the Remote Control
directly at the remote sensor
(IR) on the front panel.

2

Select the source you wish to
control by pressing one of the
source select buttons on the
remote.

3

Then select the desired
function (for example, ÉÅ, 

¡

or 

™).

CAUTION!
– Remove the battery if it is exhausted
or if the Remote Control is not being
used for a long time.
– Batteries contain chemical substances,
so they should be disposed of properly.

1

Switch the DVD system on and then select
DISC source. (See “Switching the system on/
off ”).

2

  Turn on the TV and set to the correct video-in

channel. You should see the blue Philips DVD
background screen on the TV.

➜

Usually these channels are between the

lowest and highest channels and may be called
FRONT, A/V IN, or VIDEO. See your TV manual
for more details.

➜

Or, you may go to channel 1 on your TV, then

press the Channel up button repeatedly until
you see the Video In channel.

➜

Or, the TV Remote Control may have a

button or switch that chooses different video
modes.

➜

Or, set the TV to channel 3 or 4 if you are

using an RF modulator.

This DVD system is compatible with both NTSC
and PAL. For the playback of a DVD disc on this
DVD system, the color systems of the DVD, TV
set and DVD System should match.

pg001-020_MCD179_58_Eng 3/27/08, 

15:32

16