Philips PQ202 User Manual

Page of 4
English
introduction
Congratulations on your purchase and 
welcome to Philips! To fully benefit from 
the support that Philips offers, register your 
product at www.philips.com/welcome.
general description (Fig. 1)
1  Protection cap 
2  Shaving heads
3  Shaving unit
4  Retaining frame
5  Central spring of retaining frame
6  Release button
7  Hair chamber
8  On/off slide
9  Lid of battery compartment
10  Philips Cleaning Spray (HQ 110)  
(Optional)
11 Cutter
12 Guard
13  Cleaning brush
important
Read this user manual carefully before you 
use the appliance and save it for future 
reference.
Warning
 - Keep the appliance dry.
 - This symbol means: Forbidden to clean 
under a running tap (Fig. 2).
 - This appliance is not intended for use 
by persons (including children) with 
reduced physical, sensory or mental 
capabilities, or lack of experience and 
knowledge, unless they have been given 
supervision or instruction concerning 
use of the appliance by a person 
responsible for their safety.
 - Children should be supervised to 
ensure that they do not play with  
the appliance.
Caution
 - Use and store the appliance at a 
temperature between 5°C and 35°C. 
 - Remove the batteries from the 
appliance if you are not going to use it 
for a month or more.
 - Use Philips batteries to achieve optimal 
shaving performance.
 - Only use the cleaning brush supplied.
 - Make sure the cleaning brush remains 
clean.
Electromagnetic fields (EMF)
This Philips appliance complies with all 
standards regarding electromagnetic fields 
(EMF). If handled properly and according 
to the instructions in this user manual, the 
appliance is safe to use based on scientific 
evidence available today.
Preparing for use
inserting the batteries
The appliance operates on two R6 AA 
1.5-volt alkaline batteries. Preferably insert 
new Philips alkaline batteries to get optimal 
shaving performance.
Make sure that your hands are dry when 
you insert the batteries.
 1 
 Remove the lid of the battery 
compartment (Fig. 3)
 2 
 Place two batteries in the battery 
compartment (Fig. 4).
Note: Make sure the + and - indications on 
the batteries match the indications in the 
battery compartment.
Note: The shaver does not work if the 
batteries have been placed incorrectly.
 3 
 Put the lid of the battery 
compartment back onto the appliance. 
First place the top part of the lid (1) 
and then press down the bottom part 
until you hear a click (2) (Fig. 5).
how to avoid damage due to 
battery leakage
 - Do not expose the appliance to 
temperatures higher than 35°C.
 - Remove the batteries if you are not 
going to use the appliance for a month 
or more.
 - Do not leave empty batteries in the 
appliance.
shaving time
Two new Philips alkaline batteries offer a 
shaving time of 60 minutes.
Using the appliance
 1 
 Remove the protection cap.
 2 
 Press the on/off slide to unlock it 
and push it upwards to switch on the 
shaver (Fig. 6).
The on/off slide has an integrated switch 
lock to prevent accidental switching on of 
the shaver.
 3 
 Move the shaving heads over your 
skin. Make both straight and circular 
movements (Fig. 7).
Note: Shave on a dry face only. Do not use the 
shaver in combination with gel, foam or water.
Note:  Your skin may need 2 or 3 weeks to get 
accustomed to the Philips shaving system.
 4 
 Push the on/off slide downwards to 
switch off the shaver.
PQ208, PQ206, PQ203, PQ202
Register your product and get support at
www.philips.com/welcome
4222.002.5313.2
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1