Philips sbctt300-05u User Manual
2
Connect the cable of the aerial to the television aerial socket.
If there is a video recorder already installed, connect the
cable of the aerial to the aerial socket of the video recorder.
If there is a cable network connection in use, disconnect this
cable from the television set or the video recorder, and
connect it to the socket on the back of the aerial (ANT. EXT).
Connect the mains lead of the aerial to a 230-240 VAC mains
socket. Note: the aerial is also fitted with a 12 VDC supply
socket for use in caravans, campers, boats, etc.
Switch the ON/OFF button on the aerial to ON. The red
indicator lights up, which means that the aerial is now
operational.
Tune in the different television channels using the Instructions
for Use of your TV. Turn the aerial around until optimum
reception is obtained (UHF).
In certain areas with vertical polarized broadcasting, optimal
reception can be achieved by turning the dipole (see fig. 1).
To obtain the best reception for VHF signals, vary the length
and angle of the telescopic aerial.
If there is a video recorder already installed, connect the
cable of the aerial to the aerial socket of the video recorder.
If there is a cable network connection in use, disconnect this
cable from the television set or the video recorder, and
connect it to the socket on the back of the aerial (ANT. EXT).
Connect the mains lead of the aerial to a 230-240 VAC mains
socket. Note: the aerial is also fitted with a 12 VDC supply
socket for use in caravans, campers, boats, etc.
Switch the ON/OFF button on the aerial to ON. The red
indicator lights up, which means that the aerial is now
operational.
Tune in the different television channels using the Instructions
for Use of your TV. Turn the aerial around until optimum
reception is obtained (UHF).
In certain areas with vertical polarized broadcasting, optimal
reception can be achieved by turning the dipole (see fig. 1).
To obtain the best reception for VHF signals, vary the length
and angle of the telescopic aerial.
Instructions for use
Universal amplified indoor aerial
SBC TT300
SBC TT300
Congratulations! The product you have just
purchased offers you exceptionally high quality
reception. Please read the following instructions
before using the indoor aerial, and retain this booklet
for future reference.
(See also the illustration on page 15.)
purchased offers you exceptionally high quality
reception. Please read the following instructions
before using the indoor aerial, and retain this booklet
for future reference.
(See also the illustration on page 15.)
GB
Ê
Ë
Ì
Í
Î
Ï
Ð
Notes
This aerial is powered once it is connected to a 230-240 VAC
mains supply. To disconnect the aerial from the mains supply
remove the power plug from the mains socket.
This aerial is powered once it is connected to a 230-240 VAC
mains supply. To disconnect the aerial from the mains supply
remove the power plug from the mains socket.
The base of the aerial has four rubber pads which provide
stability and which are ideal for all surfaces.
stability and which are ideal for all surfaces.
The label containing technical data can be found at the base of
the aerial.
the aerial.
Technical features
• Gain (aerial + amplifier): UHF 30 ±2dB, VHF 20 ±2dB
• Power supply: 230-240 VAC 50-60 Hz
• Gain (aerial + amplifier): UHF 30 ±2dB, VHF 20 ±2dB
• Power supply: 230-240 VAC 50-60 Hz
12 VDC for use in caravans, campers, boats etc.
• Power consumption: 3VA
• Impedance: 75 Ohms
• VDE approved
• Safety regulations according to EN 60065
• Impedance: 75 Ohms
• VDE approved
• Safety regulations according to EN 60065
2
15
1
POWER
12VDC
ANT. EXT
TV
VCR
TV
230/240V
TV