Philips WACS700 User Manual

10

All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).

Your system consists of materials which can be
recycled and reused if disassembled by a
specialized company. Please obser ve the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.

●

Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
Do not press the speakers hard..

●

When a disc becomes dirty, clean
it with a cleaning cloth. Wipe the
disc from the center out.

●

Do not use solvents such as
benzene, thinner, commercially
available cleaners, or antistatic
spray intended for analog records.

●

Keep your  WAC700 Center from violent
vibration, which may result in the damage to the
hard disk.

●

Place the sets on a flat, hard and stable surface.

●

Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.

●

Place the sets in a location with adequate
ventilation to prevent internal heat build-up in
your system.  Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.

●

The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers table-cloths, curtains, etc.

●

    The apparatus shall not be exposed to dripping

or splashing.

●

   No objects filled with liquids, such as vases, shall

be placed on the apparatus.

●

   No naked flame sources, such as lighted candles,

should be placed on the apparatus.

●

The mechanical par ts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.

p001-p045_WACS700_93-Eng

3/13/2006, 16:01

10