Philips WACS700 User Manual
23
English
Switching to power-saving mode
In the power-saving Eco power mode, the set’s
display and Wi-Fi connection are turned off. The
Center’s harddisk also stops working. When you
switch Center to Eco power, it is impossible to
move music between Center and Station or
import music from PC to Center.
display and Wi-Fi connection are turned off. The
Center’s harddisk also stops working. When you
switch Center to Eco power, it is impossible to
move music between Center and Station or
import music from PC to Center.
1
When the set is on, press and hold
STANDBY-
ON/ ECO POWER to switch it to Eco
power (or
power (or
y on the remote control)
➜
The display is switched off
2
To switch on, press and hold
STANDBY-ON/
ECO POWER (or
y on the remote control)
or press and hold
SOURCE on the set
➜
The set switches to the last source selected
Helpful hints:
– In the standby/Eco power mode, the settings of
networking, sound, display, language and CD
recording, the tuner presets, and the volume level
(maximum: the moderate level) will be retained in
the set’s memory.
– To protect the hard disk, always switch Center to
standby/ECO POWER before removing its
power plug from the wall outlet.
– In the standby/Eco power mode, the settings of
networking, sound, display, language and CD
recording, the tuner presets, and the volume level
(maximum: the moderate level) will be retained in
the set’s memory.
– To protect the hard disk, always switch Center to
standby/ECO POWER before removing its
power plug from the wall outlet.
Auto-standby
●
When the set has reached the end of playback/
recording and remains in the stop position for
more than 5 minutes, the set will switch to
standby automatically to save power.
recording and remains in the stop position for
more than 5 minutes, the set will switch to
standby automatically to save power.
Volume control
1
Check the playback starts
2
Adjust the volume with
VOL +/- buttons
➜
Display shows the volume bar, indicating the
volume level
Basic functions
Switching to standby/on and
selecting functions
selecting functions
1
When the set is on, press
STANDBY-ON/
ECO POWER to switch it to standby (or
y
on the remote control)
➜
Display shows
GoodBye. Then,
Center:
➜
The screen dims out. Display shows
Station Status screen and the number of
stations found
stations found
Station:
➜
Display shows
Center Status
screen and the number of centers found
➜
The
Center Status screen is empty if no
center is found
2
To switch on, press
STANDBY-ON/ ECO
POWER on the set
➜
The set switches to the last source selected
OR
On the remote control, press the source button
(e.g.
On the remote control, press the source button
(e.g.
HARDDISK, CD/MP3-CD, TUNER/
AUX, Center).
3
To select your function, press
SOURCE once
or more on the set (or
HARDDISK, CD/
MP3-CD, TUNER/AUX on the remote
control)
control)
●
On Station’s remote control, press
Center to
select
HD source (music stored on Center)
Helpful hints:
– CD/MP3-CD source is only available on Center.
– CD/MP3-CD source is only available on Center.
p001-p045_WACS700_93-Eng
3/13/2006, 16:01
23