Philips WACS700 User Manual
39
English
Reset
6
Select your desired language: English,
Traditional Chinese, Simplified Chinese
Traditional Chinese, Simplified Chinese
➜
The set enters
Installation Mode
➜
The search for Center or Stations starts. The
Wi-Fi connection is being re-established
If the Center is reset and Stations are
not reset:
not reset:
●
On the Stations, select
AUX mode
and enter
Installation Mode by:
a. Press
MENU.
b. Use the navigation controls 3 or 4 and 2 to
select
Installation Mode
➜
The Stations start to connect Center
If a Station is reset and the Center is
not:
not:
●
On the Center, select
HD mode and then, enter
Installation Mode by:
a. Press
a. Press
MENU
b. Use the navigation controls 3 or 4 and 2 to
enter
enter
Station Mgnt menu
c. In
Station Mgnt menu, use the
navigation controls 3 or 4 and 2 to select
Add New Station
➜
Searching for Stations starts
Reset
If desired, you can restore your Center or
Stations to their default setting (including the
network setting).
Stations to their default setting (including the
network setting).
1
Check the set is switched on (See
Basic
functions, Switching on/to standby and
selecting functions, Switching to power-
saving mode)
selecting functions, Switching to power-
saving mode)
2
Press
MENU to enter the MENU screen
3
Use the navigation controls 3 or 4 and 2
to enter
to enter
Settings
4
Use the navigation controls 3 or 4 and 2
to enter
to enter
Restore settings
5
Press 3 or 4 and 2 to select
Yes
➜
The set is rebooted. Language selection
screen appears
If both Center and Stations are reset:
●
Do as you did in the first-time Wi-Fi connection
(see
(see
Installation, Set up Wi-Fi connection
between Center and Station)
7
On Center, press
STOP
Çto exit Installation
Mode when all the Stations are found
p001-p045_WACS700_93-Eng
3/13/2006, 16:02
39