Philips sl-0347-17-1 User Manual
DVD Menu Options
1
Press
34 to highlight ‘Digital Output’.
2
Enter its submenu by pressing
2.
3
Press
34 to choose a setting.
➜
All: If you connected the DVD Player’s
Digital (Coaxial or Optical) jack to a
multi-channel decoder/receiver.
multi-channel decoder/receiver.
➜
PCM Only: Only if your receiver is
not capable of decoding multi-channel
audio.
audio.
4
Press OK, then press
1 to return to the
Audio Setup Page.
Helpful Hint:
–
–
If DIGITAL OUTPUT is set to ‘All’, all
audio settings except MUTE are invalid.
Audio Setup Menu
The options in the Audio Setup menu are:
‘Downmix’, ‘Digital Output’, ‘LPCM
Output’, ‘Sound Mode’, ‘Reverb Mode’ and
‘D.R.C. (Dynamic Range Control)’.
‘Downmix’, ‘Digital Output’, ‘LPCM
Output’, ‘Sound Mode’, ‘Reverb Mode’ and
‘D.R.C. (Dynamic Range Control)’.
1
Press SYSTEM MENU.
2
Press
3 4 to select the ‘Audio Setup’ page.
3
Press OK to confirm.
Downmix
- - AUDIO SETUP PAGE - -
DIGITAL OUTPUT
LPCM OUTPUT
SOUND MODE
REVERB MODE
REVERB MODE
LT/RT
STEREO
MAIN PAGE
DOWNMIX
D.R.C
1
Press the
34 keys to highlight ‘Downmix’.
2
Enter its submenu by pressing
2.
3
Press
34 to choose a setting.
➜
LT/RT: Select this option if your DVD
Player is connected to a Stereo with a
Dolby Pro Logic decoder.
Dolby Pro Logic decoder.
➜
Stereo: Select this option if the TV or
Stereo has right and left Audio In jacks
but does not have Dolby Pro Logic.
but does not have Dolby Pro Logic.
4
Press OK, then press
1 to return to the
Audio Setup Page.
Digital Output
Set Digital output according to the
optional audio equipment you connected.
optional audio equipment you connected.
- - AUDIO SETUP PAGE - -
DIGITAL OUTPUT
LPCM OUTPUT
SOUND MODE
REVERB MODE
REVERB MODE
ALL
PCM ONLY
MAIN PAGE
DOWNMIX
D.R.C
LPCM Output
If you connect the DVD Player to a PCM
compatible receiver using Player’s Digital
(Coaxial or Optical) jack, you may need to
adjust ‘LPCM Output’.
Discs are recorded at a certain sampling
rate, measured in kHz. The higher the
sampling rate, the better the sound quality.
compatible receiver using Player’s Digital
(Coaxial or Optical) jack, you may need to
adjust ‘LPCM Output’.
Discs are recorded at a certain sampling
rate, measured in kHz. The higher the
sampling rate, the better the sound quality.
- - AUDIO SETUP PAGE - -
DIGITAL OUTPUT
LPCM OUTPUT
SOUND MODE
REVERB MODE
REVERB MODE
96K
48K
MAIN PAGE
DOWNMIX
D.R.C
1
Press
34 to highlight ‘LPCM Output’.
2
Enter its submenu by pressing
2.
3
Press
34 to choose a setting.
➜
48K: Play a disc recorded at the
sampling rate of 48 kHz.
➜
96K: Play a disc recorded at the
sampling rate of 96 kHz.
4
Press OK, then press
1 to return to the
Audio Setup Page.
Helpful Hint:
–
–
The average setting for most Discs is
48K.