Sennheiser K 6 P 003280 Leaflet

Cat. No. 003280 

General Description

The K6P powering module is at the heart of Sennheiser’s professional 
modular condenser microphone system. It is similar to the K6 powering 
module but is powered by 12 – 48 V phantom power only, for use where 
battery power is not required (e.g. permanent installations). The K6P can 
be combined with various microphone heads to produce microphones 
with a variety of pick-up patterns. Matt black, anodised, scratch-resis-
tant finish.

Features

j

  Switchable bass roll-off filter protects against rumble, handling, 

pop and wind noise 

j

  On/off switch

j

  High output, low noise

j

  Transformerless balanced output on 3-pin XLR connector 

j

  Delivery includes:  1 K6P powering module

1 MZQ 200 microphone clamp
1 protective carrying case

Recommended Accessories

j

  ME 62 microphone head, omni-directional 

Cat. No. 003281

j

  ME 64 microphone head, cardioid 

Cat. No. 003282

j

  ME 65 microphone head, super-cardioid 

Cat. No. 003283

j

  ME 66 microphone head, short gun 

Cat. No. 003284

j

  ME 67 microphone head, long gun 

Cat. No. 003285

j

  MKE 2-60 Gold-C clip-on microphone, omni-directional 

Cat. No. 004733

j

  ME 102/104/105 mini-modular system 

j

  MZS 6 shock mount 

Cat. No. 003287

j

  MZQ 6 quick release clamp 

Cat. No. 003288

Product Variants

j

  K6P-C: as K6P, but without accessories 

Cat. No. 003862

Profile

Powering module for phantom powering with switchable roll-
off filter, suitable for ME 62 – ME 67 microphone heads and 
-60 versions of MKE microphones, transmission factor 0 dB at 
1 kHz, nominal impedance 200 

Ω, min. terminating impedance 

1 k

Ω, max. output voltage 2 V (at 1 kHz), phantom powering 

12 V – 48 V, supply current 2.2 mA, dimensions: Ø 22 x 118 mm, 
resultant length 52 mm, weight approx. 30 g.

Technical Data

Frequency response ..................................... 30 – 20,000 Hz - 1 dB
Transmission factor (1 kHz).......................................................0 dB
Nominal impedance ................................................................. 200 

Ω

Min. terminating impedance ..................................................... 1 k

Ω

Max. output voltage................................................... 2 V (at 1 kHz)
Power supply ........................................ phantom 12 - 48 V (± 4 V)
Supply current..........................................................................2.2 mA
Dimensions in mm............................................................ 118 x Ø 22
Resultant length in  mm* .............................................................. 52
Weight ............................................................................. approx. 30 g

*  Resultant length: this is the figure you need to add to the microphone head 

length to give the overall length of the complete microphone.

Cable pictured is an accessory not supplied with the powering module