Philips streamiun wacs7500 User Manual
11.5.2 Viewing the connection with home network
1
Check that
or
is in HD source.
2
Press
MENU
to enter the menu screen.
3
Use
3
or
4
and
2
to enter Information menu.
>
The display shows: System, Wireless and Wired.
4
Use
3
or
4
and
2
to select Wireless or Wired.
• Wi-Fi: information about the Wi-Fi settings.
• Ethernet: information about the Ethernet settings.
• Ethernet: information about the Ethernet settings.
11.6
Connect to Internet
Check that you have connected
to an Access Point or Router with Internet access or connect
to an ADSL modem with internet access directly.
Set DNS and Gateway
If you are using a DHCP* enabled Access Point, Router or ADSL modem, the DNS and
Gateway can be obtained automatically, so you need only to set
If you are using a DHCP* enabled Access Point, Router or ADSL modem, the DNS and
Gateway can be obtained automatically, so you need only to set
to Automatic
(DHCP):
1
Press
MENU
.
2
Use
3
or
4
and
2
to select Settings followed by Network.
3
Select Wired or Wireless.
4
Use
3
or
4
and
2
to select Automatic (DHCP).
*
DHCP stands for Dynamic Host Configuration Protocol. It is a protocol for assigning dynamic IP
addresses to devices on a network.
addresses to devices on a network.
Network settings
73
ENGLISH
Important! Make sure that no dial-up, user name or password is required for the Internet
access.
access.