Philips streamiun was7500 User Manual

Installation

18

Ensure that all rear connections are established before you power up the set.

Connect the AC power cord to the mains outlet.The set is now powered up (switched on).

When in Standby or Eco Standby mode,

and 

still consume some power.

To disconnect the system from the power supply completely, remove the power plug from the
mains outlet.

• Always press & hold 

y

to switch the set to Eco standby (power-saving mode) before removing its

power plug.

• Always power up the 

first, and then power up the 

.

• Never block 

from 

by thick walls or more than one wall.

• Avoid installation near large metal objects.

The Wi-Fi connection starts automatically when you power up both 

and 

.

The first time you set up a Wi-Fi connection place 

and 

side by side on a level and sturdy

surface.

Using the supplied power cables, connect first 

and then 

to the power supply.

For better Wi-Fi reception, rotate the Wi-Fi antenna or adjust the location of 

and 

.

• Never connect or disconnect power cables when the mains supply is switched on.
• Install 

and 

within easy reach of suitable AC power outlets.

Important! Always press & hold 

y

to switch the set to power-saving mode before removing its

power plug.