Philips td6411-bg051p User Manual
Using advanced functions
26
Registering one handset with several base stations
To register your handset with a new base station, proceed as for “Registering a
new handset with your base station”
new handset with your base station”
on page 24.
Impor tant:
You can register your handset with a maximum of 4 base stations. If your handset
is already registered with 4 base stations, then remove it from one of the base
stations.
is already registered with 4 base stations, then remove it from one of the base
stations.
Selecting the base station
Even when your handset is registered with two base stations, it is connected to
only one base station at a time. You have to select the base station each time you
want to change the ‘active’ base station, unless you choose the
only one base station at a time. You have to select the base station each time you
want to change the ‘active’ base station, unless you choose the
AUTO
option and
the closest base station is automatically detected as soon as the signal of the
previously selected base station is lost.
previously selected base station is lost.
For example, if you are using your handset with a base station you have named
‘Home’ and you now wish to make a call on a base station you have named ‘Office’,
you will have to select it before you can do so.
‘Home’ and you now wish to make a call on a base station you have named ‘Office’,
you will have to select it before you can do so.
Press
R
, then press
-
until
BASE SEL
is displayed. Press
o
.
Press
+
or
-
until the name of the base station to which you want to be
connected is displayed, or until
AUTO
is displayed.
AUTO
mode functions when there is no signal from the base station to the
handset.
Press
o
.
Your handset will beep to confirm that it is now searching for the new base
station, or for the closest base station if
station, or for the closest base station if
AUTO
was selected.
Press
R
to leave menu mode.
Removing a handset
You can remove any handset that is registered with your base station.
Press
R
, then press
+
to display
SETUP
. Press
o
.
Press
-
until
REMOVE HS
is displayed, then press
o
.
Press
+
or
-
to select the handset you wish to remove, then press
o
.
When
CODE?
is displayed, enter the code “RC” which is under the base
station, then press
o
.
Your handset will beep to confirm that the handset has been removed.
Press
R
to leave menu mode.
If the handset that you have removed is the one you are using, it will automatically
switch to its next registered base station.
switch to its next registered base station.
1
2
3
4
1
2
3
4
5