Philips td6411-bg051p User Manual

Page of 36
Installing your Onis
5
Installing your Onis
Connecting your phone
Deciding where to put the base station
To reduce to a minimum any interference with other electronic devices such as 
telephones, televisions, screens, etc. we advise you to place your base station at 
least 50 cm from any such device.
Place the base station on a flat surface such as a desk.
Do not install the base station in a damp or humid room.
Do not place the base station near a strong source of heat.
The operating range of your cordless telephone will vary according to your 
environment.  Significant obstacles such as concrete walls or metallic supports 
(windows and door frames, partitions, etc.) will lessen the communication range 
between the base station and the handset.
The range can be improved by placing the base station higher than the handset.
Connecting the base station
Make sure that you connect the power plug to the correct mains voltage of 
220-240V.
   
2
 Step two
 
Plug the power cable 
into the base station 
and then into the wall 
outlet.
Plug the telephone 
cable into the base 
station and then into 
the telephone 
connector on the wall.
Step one
 
2
1