Philips td6533-bb051p User Manual

You can record up to 6 minutes of top quality messages or 9 minutes of standard quality 

messages (see Page 10, Programming options, to learn how to change the telephone 

answering machine recording quality.)

The key 

("answering machine" key) is located on the back of the handset.

This key is backlit. Press this key to listen to your messages.

A blinking key indicates receipt of an unread message. Once you have listened to your messages, 

press this key again to quit the answering machine function.

Press the 

key to access the machine. The number of messages, the day of the week and the time will

be displayed. The telephone will vocally state the number of messages received and play
the message(s) recorded.

Press the following keys to listen to the pre-recorded message:

When the answering machine is active, callers can leave messages. If you wish to screen your calls,
you can listen to the person leaving the message by pressing

again to

increase the volume. Press this key to deactivate the loudspeaker. To interrupt the message and take
the call, press 

. Press the 

key again to deactivate this function.

You can access to your answering machine via a simple telephone call.
The 4-digit remote access “RC code“ is found on the bottom of the base station of the telephone. This
can be personalised using the programming options (see Page 10 Programming options).

key (or using a voice dial telephone):

1. During the outgoing message, press the 

key.

2. Enter the remote access code.
3. The system will announce the number of messages received and read recorded messages. Use the

telephone keys to consult your messages.

Once connected to your answering machine, use the following keys:

4. Hang up to end the access session.

twice go to the beginning of the previous message

go to the beginning of the next message and play it

delete the message being read

or

You can personalise your recorded message. However, if you do so, you will be unable to retrieve the
original message.

Using this function, you can leave a local message for your family members.

or

is used to access the redial list - a list of the last 5 numbers called, from the latest to
the oldest. Each new entry deletes the oldest entry. You can use this function to automatically
redial a caller’s number.

Use the

key to access the list of last numbers dialled (you will hear a beep if there are no

entries in the list).
Use the same key to exit the list.

The call log contains the last 10 external calls received, starting with the most recent. If you have
subscribed to the Caller identification service (see Page 5), you will be able to store number or
name in the log (according to the information provided by the network).

Caller identification service:
Subscription to your operator’s Caller identification service enables the caller’s name and number to be
stored directly in the incoming call log if registered with your operator’s network.

Use the 

key to access the log. Use the same key to exit the log.

Consulting the log
You will only be able to access the information shown on the screens below if you have subscribed to the
Caller identification service.

or

or

or

or

or

the time and date

of the call

(*)

possibly an

"envelope" icon

if a message has

been left.

a name identified

(*)

a telephone

number

6 stars if 

unidentified

(**)

call

OR

OR

or

or

or

or