Philips VR1010 User Manual
— 5 —
To insert the batteries:
Note:
This remote control and batteries are
supplied accessories.
Check to make sure they are included.
Also, check “Specifications” to see what
other accessories are included.
This remote control and batteries are
supplied accessories.
Check to make sure they are included.
Also, check “Specifications” to see what
other accessories are included.
3
Replace the lid.
2
Install two AA batteries —
R6(SUM-3)/AA — matching
polarity indicated inside the battery
compartment.
R6(SUM-3)/AA — matching
polarity indicated inside the battery
compartment.
CAUTION
On Battery Replacement
Do not mix old and new batteries.
(Also never mix alkaline batteries
with manganese batteries.)
On Battery Replacement
Do not mix old and new batteries.
(Also never mix alkaline batteries
with manganese batteries.)
1
Remove the battery compartment lid
from the bottom of the remote
control.
from the bottom of the remote
control.
17 SMARTPICTURE button
Selects the SmartPicture mode. (✈P.21)
18 Number buttons
(0, 1, 2, 3, 4, 5, 6, 7, 8 and 9)
Before using these buttons, press
VCR
or
TV
to select your target component.
• Press to select a channel on the VCR
or TV.
To select channels 1 to 9, press
To select channels 1 to 9, press
0
then
the channel you want. For example, for
channel 4, press
channel 4, press
0
then
4
.
• Press to enter characters in the
"EDIT TITLE" screen. (✈P.15)
• Also used to programme the Timer
Recordings. (✈P.25)
19 CLEAR button
• Erases unwanted timer programmes.
(✈P.25)
• Resets counter to 0:00:00.
20 STILL/SLOW
button
• Stops the tape during recording
(pause) or playback (still picture).
(✈P.13, P.19)
Press again to resume normal
recording.
Press
(✈P.13, P.19)
Press again to resume normal
recording.
Press
PLAY
3 to resume normal
playback.
• Activates slow motion picture when
pressed for more than 2 seconds
during playback. (✈P.19)
during playback. (✈P.19)
21 STILL/SLOW + /
¢ button
• During a slow motion picture, adjusts
the playback speed in the forward
direction. (✈P.19)
Press
direction. (✈P.19)
Press
PLAY
3 to resume normal
playback.
• Locates an index marked at the
beginning of every recording. (✈P.19)
22
¡ (Fast Forward) / 3 button
Before using this button, press
VCR
or
TV
to select your target component.
• After pressing
VCR
:
– Fast forwards the tape. Also during
playback, starts rapid forward
visual search. (✈P.13)
visual search. (✈P.13)
– Changes the setting of a menu item
when using the menus. (✈P.10)
• ONLY FOR SOME PHILIPS TVs:
After pressing
TV
, operates the TV’s
menus.
23 OK/STATUS button
Before using this button, press
VCR
or
TV
to select your target component.
• After pressing
VCR
:
– Goes to the next item on the VCR
menu. (✈P.10)
– Displays the time counter, present
time, channel number, and
remaining tape length. (✈P.20)
remaining tape length. (✈P.20)
• After pressing
TV
:
For some PHILIPS TVs:
– Displays the TV’s on-screen
– Displays the TV’s on-screen
information.
For other manufacturers’ TVs:
Functions as the ENTER button if
your TV requires pressing ENTER
after selecting a channel number.
Functions as the ENTER button if
your TV requires pressing ENTER
after selecting a channel number.
24 CH (channel)
5 / ∞ button
Before using this button, press
VCR
or
TV
.
• After pressing
VCR
, changes the
channels on the VCR. Release at a
desired channel.
desired channel.
• After pressing
TV
, changes the
channels on the TV. Release at a
desired channel.
desired channel.
25 TIMER button
Displays the Timer Recording menu.
(✈P.24)
(✈P.24)
26 TAPE MANAGER
Press to access the Tape Manager
directory screen. (✈P.14)
directory screen. (✈P.14)
27 SKIP SEARCH button
Press during tape playback to fast
forward 30 seconds of a tape. (✈P.19)
forward 30 seconds of a tape. (✈P.19)
28 REC (record)/OTR button
• Start recording when pressed once.
(✈P.13)
• Starts a recording for 30 minutes to 6
hours long. When pressed more than
once, the shut-off time increases in
30-minute intervals. (✈P.20)
once, the shut-off time increases in
30-minute intervals. (✈P.20)
29 Jog Dial
Advances or reverses the picture frame
by frame in the still picture mode.
(✈P.19)
by frame in the still picture mode.
(✈P.19)
Note:
The following buttons will glow when you
use or place the remote control in the dark
area.
• PLAY
The following buttons will glow when you
use or place the remote control in the dark
area.
• PLAY
3
• STOP
7
•
¡ (Fast forward)
•
1 (Rewind)
• VOL (ume)
5/
∞
• CH (annel)
5/
∞
vr1010/75
00.6.29, 4:53 PM
5