Philips WP3811 User Manual

Place the matching adapter (A-type) over the tip of the spout. The

16mm adapter is packed with the water purifier. Replace it with

the 17.5mm adapter or 19mm adapter to fit the diameter of your

tap (Fig. 5).

Screw the attachment nut firmly onto the water purifier

housing (Fig. 6).
installation B-type adapter

For taps with an aerator (threaded outside) (Fig. 7).

Remove the attachment nut and the adapter from the water

purifier (Fig. 8).

Remove the aerator cap from the tap and pass the attachment nut

over the spout. Take out the original adapter and screw the

matching adapter (B-type) onto the tap (Fig. 9).

Tighten the adapter further with a coin (Fig. 10).

Firmly screw the attachment nut onto the water purifier

housing (Fig. 11).
installation C-type adapter

For taps with an aerator (threaded inside) (Fig. 12).

Remove the attachment nut and the adapter from the water

purifier housing (Fig. 13).

Remove the aerator cap from the tap. Take out the original adapter

and screw the matching adapter (C-type) onto the tap through the

attachment nut. (Fig. 14)

Tighten the adapter further with a coin (Fig. 15).

Firmly screw the attachment nut onto the water purifier

housing (Fig. 16).
installation D-type adapter

For taps other than A, B or C. (Fig. 17)

Remove the attachment nut and the adapter from the water

purifier housing (Fig. 18).

English