Philips VRX260AT User Manual
VCR PLUS+ PROG.
PLUS CODE : – – – – – – – –
TO END PUSH EXIT
34 Timer Recording With the VCR Plus+ Programming System
Follow these steps to set a timer recording with the PlusCode
programming numbers in your TV guide. Before you begin:
programming numbers in your TV guide. Before you begin:
●
Set up the channels at the VCR (page 12).
●
Set up the VCR Plus+ and Cable/TV channel numbers (pages 32
- 33).
- 33).
●
Set the clock (page 15).
●
Put a tape in the VCR.
●
Turn on the VCR power. The VCR light should appear on the
display panel. If it does not, press the VCR/TV button once.
display panel. If it does not, press the VCR/TV button once.
Do each step within 60 seconds of the previous step.
1
Press the VCR PLUS+ button.
2
Press the Number buttons to enter the PlusCode pro-
gramming number of the program you wish to record.
Then, press the VCR PLUS+ button.
gramming number of the program you wish to record.
Then, press the VCR PLUS+ button.
VCR PLUS+ PROG.
PLUS CODE : 13285 – – –
TO SET PUSH VCR+
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
3
Press the PLAY/o button or the STOP/p button to select
a ONCE, DAILY, OR WEEKLY recording. Then, press the
F.FWD/B button.
a ONCE, DAILY, OR WEEKLY recording. Then, press the
F.FWD/B button.
●
ONCE: The VCR will record a TV program on any day you
choose, up to 12 months away.
choose, up to 12 months away.
●
DAILY: The VCR will record the same channel every day from
Monday to Friday – starting at the same time and recording for
the same length of time.
Monday to Friday – starting at the same time and recording for
the same length of time.
●
WEEKLY: The VCR will record the same channel on the same
day, at the same time, and for the same length of time every
week.
day, at the same time, and for the same length of time every
week.
• CODE ERROR may flash on-screen
after step 2 if you enter an incorrect
number (for example, one that is too
short). The previous screen will
appear. Enter the correct PlusCode
programming number.
number (for example, one that is too
short). The previous screen will
appear. Enter the correct PlusCode
programming number.
• If the VCR PLUS+ CROSS REF. MAP
reappears after step 2, the VCR
PLUS + channel number for the
recording you entered was higher
than 99. In this case, enter the cor-
rect CABLE/TV channel in the map.
Then, press the MENU button and
continue from step 3.
PLUS + channel number for the
recording you entered was higher
than 99. In this case, enter the cor-
rect CABLE/TV channel in the map.
Then, press the MENU button and
continue from step 3.
• If CLASH flashes on-screen after step
2, the timer recording you just pro-
grammed and another timer record-
ing overlap. The current timer record-
ing will not occur.
grammed and another timer record-
ing overlap. The current timer record-
ing will not occur.
• If you select DAILY at step 3,
ERROR may flash on-screen if the
program you want to record is
broadcast on a Saturday or Sunday.
program you want to record is
broadcast on a Saturday or Sunday.
Helpful Hints
VCR PLUS+ PROG.
→
ONCE
DAILY
WEEKLY
DAILY
WEEKLY
SELECT op CHOOSE B
TO END PUSH EXIT
TO END PUSH EXIT
2
1
1
3
POWER
EJECT
VCR/TV
1
2
3
4
5
6
7
8
9
0
CHANNEL
MEMORY
STATUS/EXIT
CLEAR
SLOW
MENU
REWIND
/PLAY
F.FWD
REC/OTR
PAUSE/STILL
/STOP
+100
TIME SEARCH
SPEED
VCR PLUS+
VRX260 LAYOUT 4/8/99 8:53 PM Page 34