Philips workcentre pe120i User Manual
AC4054
Clean air system
Specifications
Product highlights
Technical Specifications
•
Voltage:
220 - 240 V
•
Frequency:
50/ 60 Hz
•
Power Consumption:
34 (at 220V~, hi speed), 36
(at 220-240V~, hi speed) W
•
CADR:
> 60 ft³/min
•
Particle removal efficiency:
> 99 (particle size at
0.02 - 10 µm) %
•
Gas removal efficiency:
> 99 (run at hi speed over
3 mins inside 1m3 box) %
•
Recommended Room Size:
Up to 20 m²
•
Operating Temperature:
5 - 40 °C
•
Operating Relative Humidity:
20 - 90 %
•
Noise Level:
< 49 (JIS compliance) dB
•
Power cord:
1.8 m
Finishing
•
Color - Air outlet mesh/ Control panel:
Silver
Blue
•
Color - Front Cover/ Air inlet mesh:
Christal
Silver
•
Color - Rear Housing:
Translucent Algiers Blue
•
Color - Control button:
Christal Silver
Dimensions and weight
•
Product:
Approx. H490 X W281 X D216 mm;
5.0Kg
•
F Box:
Approx. H575 x W352 x D283 mm; 6.5Kg
Logistic data
•
CTV:
8834 054 00000
•
12 NC:
8834 054 00010 (Western Europe), 8834
054 00660 (Taiwan), 8834 054 00450 (Hong
Kong), 8834 054 00710 (China)
•
EAN F Box:
87 10103 31450 9 (Western Europe),
87 10103 31452 3 (Hong Kong), 87 10103 31454
7 (Taiwan), 87 10103 31456 1 (China)
Replacement
•
ESP particle filter:
AC4105
•
Zeolite gas filter:
AC4115
•
Issue date 2007-12-17
Version: 4.1
© 2007 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
SmartAir Control
The built-in sensor measures the air quality in the room
and automatically selects the appropriate speed setting
to guarantee the best possible air quality in your rooms.
The dual color display informs you on the actual air
quality, and will be red if the air quality is not yet good
enough, and green when the air is fresh and healthy
again.
BoostPower
When the appliance is switched on at BoostPower, it is
set at high fan speed to quickly clean the air. After 30
minutes, it automatically switches to SmartAir Control
mode.
6-stage CleanAir System
The advanced and innovative 6-stage CleanAir System
removes and sterilizes even the finest particles and a
wide spectrum of gases and odours. * The 3-stage
ElectroClean filtration system efficiently removes particles
* The 2-stage FreshAir filtration system removes gases
and odours * The active oxygen sterilizes trapped
particles and constantly rejuvenates the zeolite filter,
ensuring longlasting superiour performance
3-stage ElectroClean filtration system
The 3-stage ElectroClean filtration system works three
ways. * First, the pre-filter blocks larger particles, such as
hairs, animal dander and house dust allergens. * Second,
the finer particles that have passed through the pre-filter,
including bacteria and viruses, are charged by the Corona
Field Charger. * Third, the Electro-Static Precipitation
(ESP) filter attracts these charges particles to its surface
and keeps them safely trapped. With average use, the
cost-effective ESP filter only needs to be replaced once
every five years.
Active oxygen
The active oxygen, which is generated by the Corona Field
Charger, sterilizes harmful germs such as bacteria and
viruses that are trapped in the Electro-Static Precipitation
(ESP) filter. It then passes through the zeolite filter, where
it oxidizes the trapped gases, rendering them harmless.
Thanks to this process, the zeolite filter is constantly
rejuvenated and its life can be extended over many years.
2-stage FreshAir filtration system
The 2-stage FreshAir filtration system uses advanced
Nano-Confined Catalytic Oxidization (NCCO) technology.
Firstly, the hi-grade zeolite filter traps a wide spectrum of
gases and odours and subsequently uses the active
oxygen that passes through to neutralize them,
constantly rejuvenating the filter. Compared to the
traditional activated carbon filter, this hi-grade zeolite
filter performs more stably in different humidity
conditions, and because it is rejuvenated by the active
oxygen, it can last a much longer life of upto five years.