Palm treo 700wx User Manual
8
Basics
4.
Slide the battery door onto the back of the smart device until it clicks into place. Your
smart device screen turns on and the Treo screen appears. Wait for the progress bar
on the Treo screen to fill and the Windows Mobile
smart device screen turns on and the Treo screen appears. Wait for the progress bar
on the Treo screen to fill and the Windows Mobile
®
screen to appear.
5.
Follow the onscreen instructions to finish the installation.
Charging the Battery
The battery comes with a sufficient charge to complete the setup process and activate your
phone. After activation, we recommend charging your smart device for 3.5 hours (or until
the indicator light is solid green) to give it a full charge. See the Treo 700
phone. After activation, we recommend charging your smart device for 3.5 hours (or until
the indicator light is solid green) to give it a full charge. See the Treo 700
WX
User Guide for
tips on maximizing the life of your device’s battery.
1.
Plug the AC charger into a wall outlet.
2.
Connect the charger cable to the charger jack on the bottom of the device. Make sure
the arrow on the connector is facing up, toward your Treo device screen.
the arrow on the connector is facing up, toward your Treo device screen.
3.
To confirm that your device is charging, check the indicator light.
䡲
Solid red indicates that your device is charging.
Note:
If your smart device does not turn on after you insert the battery, you
need to charge it by connecting it to the AC charger. If it still doesn’t start,
do a soft reset. See “Resetting Your Smart Device” on page 39.
need to charge it by connecting it to the AC charger. If it still doesn’t start,
do a soft reset. See “Resetting Your Smart Device” on page 39.