Casio e110 User Manual

The optionally available wired remote controller lets you op-
erate the camera with touching it. This capability helps to
avoid the effects of unintended camera movement when
shooting at slow shutter speeds or with high telephoto set-
tings with the camera mounted on a tripod. You can also use
it to scroll through images during presentations on a TV
screen. For more information about using the wired remote
controller, see the instructions that come with it.

Wired Remote
Controller Model: WR-2C (option)

Approximate Cable Length: 1 meter

• You can perform the following operations using the wired

remote controller: shutter release, zoom slider, MENU,  /

/MF RESIZE, [+], [–], SHIFT INFO,   

, 

 

.

Use of a commercially available flash unit makes it possible
to obtain a higher level of brightness (guide number) than
you get when using the built-in flash alone. An external flash
also makes it possible to extend the effective range of flash
photography.
• The guide number of the internal flash is 9 (ISO 100/m).

The external flash unit you use with your camera must sat-
isfy the following requirements.
• Configuration: tripod hole mountable grip type with sync

cable; or tripod hole mountable with grip-equipped bracket
and sync cable

• Coverage Angle: Coverage of 40mm equivalent 35mm fo-

cal length lens (without wide conversion lens)

• Some flash performance may be lost when using a ring

flash or other type of unit with a long flash time.

• The aperture values and ISO sensitivity available with

some flash units may not match the values supported by
your camera. In such a case, make adjustments in the ap-
erture and ISO sensitivity settings of the external flash and
the camera until proper brightness is achieved.

• Some flash performance may be lost when using a zoom

flash.

USB

VIDEO OUT

DC IN 6V

DIGITAL

Wired
Remote
Controller

DIGITAL terminal