Planar LB1500R User Manual

To setup this display, please refer to the following figure and procedures. 

1.  Be sure all equipment is turned off. 

2.  Connect the DC power cord to the power connector; plug one end of the AC 

power cord into the power adapter, and the other end into an electrical outlet 

(n). 

3.  Connect the VGA signal cable from display VGA input connector to the 15-pin 

connector of your host computer and tighten the screws ( ). 

4.  For LB1503R connect the DVI signal cable from display DVI input connector 

to DVI connector of your host computer and tighten the screws ( ) 

5.  For LB1503R connect the composite video cable from display video input to 

video output source ( ). 

7.  Turn on your computer, display and or video source.