Pelco ICS310-SS User Manual

 

To do the installation, use the 1/8-inch hollow screwdriver bit supplied with the Camclosure

 

®

 

 integrated camera system.

Refer to Figure 1. Attach the adapter plate to a two-gang electrical box with the four 6-32 x 0.5-inch flat-head security screws. Connect video and power. 
Attach the Camclosure integrated camera system to the adapter plate with the two 6-32 x 1.25-inch security screws and nylon washers.

Refer to the manual supplied with the Camclosure integrated camera system to complete the installation.

 

ICS310-AP Installation

 

Snap the sun shroud in place. Refer to Figure 2. The sun shroud reduces the internal temperature of the enclosure approximately 10°F (6°C).

 

ICS310-SS Installation

ICS310-AP ADAPTER
PLATE

WALL OR
CEILING

ELECTRICAL BOX

(4) 6-32 X 0.5
SCREWS
(SUPPLIED)

(2) 6-32 X 1.25
SCREWS
(SUPPLIED)

(2) NYLON WASHERS
(SUPPLIED)

SUN SHROUD