Perreaux sm6-p User Manual
12
Note: The position of the Balanced CD Input switch has no bearing on the
balanced output, it only selects which CD input to use. Set the balanced
CD input switch to ON only when using the balanced CD input....
Refer to Chapter 13 “Specifications”, for detail on input sensitivity and
impedance.
impedance.
Unbalanced Source Inputs
Accepts a standard single-ended input (RCA) from source components with
single-ended analogue outputs. These high quality gold plated sockets are
highly conductive, corrosion resistant, and provide less potential for corrosion
induced distortion.
single-ended analogue outputs. These high quality gold plated sockets are
highly conductive, corrosion resistant, and provide less potential for corrosion
induced distortion.
Refer to Chapter 13 “Specifications”, for detail on input sensitivity and
impedance.
impedance.
VCR Line Outputs
This single-ended (RCA) output will provide a line level audio signal, suitable
for recording, from the selected source input. This output is disconnected when
the VCR source input is selected; to prevent any potentially damaging feedback
loops.
for recording, from the selected source input. This output is disconnected when
the VCR source input is selected; to prevent any potentially damaging feedback
loops.
Tape Line Outputs
This single-ended (RCA) output will provide a line level audio signal, suitable
for recording, from the selected source input. This output is disconnected when
the Tape source input is selected; to prevent any potentially damaging feedback
loops.
for recording, from the selected source input. This output is disconnected when
the Tape source input is selected; to prevent any potentially damaging feedback
loops.
Main Output 1
This single-ended (RCA) output is commonly referred to as “Preamp Out”. It
will provide the audio signal required to drive virtually any amplifier to full
power.
will provide the audio signal required to drive virtually any amplifier to full
power.
Main Output 2
This single-ended (RCA) output is wired in parallel with Main Output 1 and is
useful for supplying signal to another amplifier if bi-amping.
useful for supplying signal to another amplifier if bi-amping.
Balanced Outputs
This balanced (XLR) preamplifier output provides the signal required to drive
virtually any power amplifier equipped with a balanced input. Connection
should be made with high quality cables fitted with XLR connectors.
virtually any power amplifier equipped with a balanced input. Connection
should be made with high quality cables fitted with XLR connectors.
Note: The position of the balanced CD input switch has no bearing on the
balanced output; it only selects which CD input to use. It is not necessary
to set this switch to ON when using the balanced outputs.