Magnavox dp100mw8 User Manual

– 9 –

EN

STANDBY-ON

AUDIO

SUBTITLE

ANGLE

REPEAT

CLEAR

A-B

PAUSE

SLOW

SKIP

OPEN/CLOSE

DISPLAY

SEARCH

MODE

1

2

3

4

5

6

7

8

9

0

+10

PLAY

REV

FWD

STOP

Please note : most instructions in this manual refer to remote control use.

Before: 
Turn on the TV, amplifier and any other 
device which are connected to this unit. 
Make sure the TV and audio receiver are 
set to the correct channel.

 

  

(

 

⇒

on page 10

)

• When you play back a CD-RW/-R with MP3 files, 

details on page 10.

• A  “   ” may appear at the top-right on the TV 

screen when the operation is prohibited by the disc or this 
unit.

• Some DVD may start playback from title 2 or 3 due to 

specific programs.

• During the playback of a 2-layered disc, pictures may 

stop for a moment. This happens while the 1st layer is 
being switched to the 2nd layer. This is not a malfunction.

• You can change the on-screen language in “PLAYER 

MENU” setting. (Refer to page 14.)

1  Press [STANDBY-ON] to turn on 

this unit.

2  Press [OPEN / CLOSE A] and 

insert a disc with label facing up.

3  Press [PLAY B] to start playback.

4  Press [STOP C] to stop playback.

Lights up when power is on.

  

  

  

Press [STOP C] during playback. Resume icon 
will appear at the top-left on the TV screen. 
Press [PLAY B], playback will resume from 
the point at which playback was stopped. 

Press [FWD g] repeatedly in the pause 
mode to select the required forward speed.
To continue playback, press [PLAY B].

  

  

Press [PAUSE F] during playback.
To continue playback, press [PLAY B].

 

The disc goes forward by one frame each time [PAUSE F]
is pressed in the pause mode.
To continue playback, press [PLAY B].

• Slow forward speed is different depending on the disc. 

Approximate speed is 1(1/32), 2(1/16), 3(1/8), 4(1/4) and 
5(1/2).

• Set “STILL MODE”  to “FIELD” in “DISPLAY” menu if 

pictures in the slow playback mode are blurred. (Refer to 
pages 14-15.)

• The reverse of slow playback is not available.

  

  

Use [FWD g] or [REV h] repeatedly 
during playback to select the required 
forward or reverse speed.
To continue playback, press [PLAY B].

1

E

 

1

• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if 

pictures in the pause mode are blurred. (Refer to pages 
14-15.)

PAUSE

• Menu operations may vary depending on the disc. Refer 

to the manual accompanying the disc for more details.

R.STOP

• To cancel resume, press [STOP C] one more time in the 

stop mode.

• The resume information will be kept even when unit is in 

standby mode. 

• For MP3, playback will resume from the beginning of the 

track at which playback was stopped.

• Fast forward or reverse search speed is different 

depending on the disc. Approximate speed is 1(x2), 2(x4), 
3(x8), 4(x16) and 5(x32).

• Zooming function does not work while the disc menu is 

displayed.

• Some part of the picture may not be zoomed depending 

on the disc or playback status.

1) Press  [ZOOM] repeatedly during playback to select the 

required zoom factor: x2, x3, x4, x1/2 or off.

x2

x3

x4

x1/2

2) Use  [K / L / s / B] to slide the zoomed picture across 

the screen.

3)  To exit zoom function, press [ZOOM] repeatedly to select 

OFF.

Some discs contain menus which allow you to customize 
DVD playback. Use [K / L / s / B] to select an item, then 
press [ENTER] (or [PLAY B]).

• Press [MENU] to call up the disc menu.
• Press [TOP MENU] to call up the title menu.

E6C0TUD.indd   9

E6C0TUD.indd   9

2007/04/03   10:37:37

2007/04/03   10:37:37