Maytag front-loadingautomaticwasher User Manual

Page of 72
16
Options
You can customize your wash by adding options to your cycle 
selections. You can add or change an option after starting a cycle 
anytime before the selected option begins. Not all options are 
available with all cycles. 
See the “Laundry Guide” for an overview of possible options 
for each Wash Cycle selection.
You can select more than one option for a cycle. Some 
options cannot be added to some cycles; for example, 
Prewash cannot be added to the Rapid Wash cycle.
If an option is available with a selected cycle, the light for that 
option will glow when selected.
If an option is unavailable with a selected cycle, there will be a 
short tone, and the light for that option will not glow when 
selected.
Prewash
Use this option for heavily soiled loads that need pretreatment. 
This option adds a 15-minute prewash and drain to the main 
wash cycle. 
NOTES:
Add detergent to the Prewash and Main Wash  
compartments of the Dispenser Drawer.
When using Prewash, use powdered detergent for the Main 
Wash detergent compartment because liquid detergent will 
seep into the washer during Auto Soak.
NOTE: The Prewash and Auto Soak options cannot be selected 
in the same cycle.
Auto Soak 
Use the Auto Soak option for loads of heavily soiled cotton, linen, 
polyester or nylon with set-in stains. During Auto Soak, water will 
be added to the drum and the laundry will be equally distributed 
by a short tumbling phase. Laundry will then be  soaked by 
phases without drum movement. After soaking, the washer 
drains without spinning.
Add detergent to both the Prewash and Main Wash 
compartments of the Dispenser Drawer. 
Use powdered detergent for the main wash cycle because 
liquid detergent will seep into the washer during Auto Soak.
For cycles with Hot Wash Temperatures, the Soak 
temperature is set to WARM. Otherwise the Soak 
temperature is the same as the Wash Temperature.
The Auto Soak and Prewash options cannot be selected in 
the same cycle. 
Extra Rinse
An extra rinse can be used to ensure the removal of detergent or 
bleach residue from garments. This option provides an additional 
rinse with the same water temperature as the first rinse.
Rinse Hold
Use this option to avoid wrinkling of your laundry when a load 
cannot be removed from the washer immediately. The wash cycle is 
paused before the final drain and spin phase so that the laundry 
stays in the rinse water until the cycle is continued. This provides 
optimal wrinkle care of your wet laundry. The door stays locked 
during the Rinse Hold cycle and the indicator light is flashing. Press 
RINSE HOLD to finish the cycle and unload the washer.
Modifiers
Preset cycle settings of Soil Level (cycle time), Water 
Temperature, and Spin Speed can be changed. You can change a 
modifier after starting a cycle anytime before the selected 
modifier begins. Not all modifiers are available with all cycles and 
options. 
To change the water temperature, select the WATER TEMP 
button until the desired setting glows.
To change the spin speed, select the SPIN SPEED button 
until the desired setting glows.
To change the loudness of the Cycle End Signal, select 
(ADJUSTABLE) CYCLE END SIGNAL.
To change cycle time, select SOIL LEVEL button.
Wash/Rinse Temp
Select a water temperature based on the type of load you are 
washing. Use the warmest wash water safe for fabrics. Follow 
garment label instructions.
Warm rinses leave the loads dryer than cold rinses. Warm rinses 
increase wrinkling. In cold climates, a warm rinse makes the load 
more comfortable to handle. Cold rinses save energy.
Temperature Guide
In wash water temperatures colder than 60°F (15.6°C), detergents 
do not dissolve well. Soils may be difficult to remove. 
Automatic Temperature Control
The automatic temperature control electronically senses and 
maintains a uniform water temperature. Automatic temperature  
control regulates incoming hot and cold water. Automatic 
temperature control is automatically turned On when a cycle is 
selected. See “Preset Cycle Settings” in “Cycles.”
Automatic temperature control works for all wash and rinse 
temperature settings.
Wash Water Temperature
Suggested Fabrics
SUPER HOT
Sturdy colorfast fabrics
Heavy soils
HOT
Whites and pastels
Heavy soils
WARM
Bright colors
Moderate to light soils
COLD
Colors that bleed or fade
Light soils