Magellan maestro 4000 User Manual

4

Line up the two tabs on the adjustable mount with 
the holes on the back of the cradle.  Once the 
adjustable mount is flush with the cradle, push the 
cradle and receiver assembly down until they lock 
in place with the adjustable mount.

Make sure that the lever at the base of the adjustable mount is in the up position.  Place the base of 
the mount firmly over the area of the windshield to be used or the adhesive disk.  Push the lever at 
the base of the mount all the way down until it snaps in place.  Carefully let go of the assembly, 
making sure that it is securely mounted.

Loosen the adjustment locking knobs and position the Magellan Maestro for optimum viewing.  Once 
set, tighten the locking knobs.  (Never attempt to adjust the mount while driving.)  

Plug the end of the cigarette lighter adapter into a 
12 VDC cigarette lighter receptacle in the vehicle.  
Connect the other end to the Magellan Maestro as 
shown.  There is a wire catch on the side of the 
cradle to run the power cable through to prevent it 
from disconnecting.  If there is power at the 
receptacle, the Magellan Maestro will power on.  
(Note: some vehicles apply power to the cigarette 
lighter receptacle only when the ignition is on.)

It is recommended that the Magellan Maestro is not left in plain view while unattended for reasons of 
theft.  The easiest method for removing the Magellan Maestro once the mount is in place is to unsnap 
it from the cradle by pressing on the tab at the top of the cradle.