Edirol M-10MX Leaflet

● 10-channel full digital mixer with M-16DX flagship features

● 3-band EQ controls (Q & Freq.) with graphic LCD for precise 

● Portable, all-in-one design

● “Room Acoustic Control” for instant automatic room 

● Built-in pro-quality Effects, including COSM insert effects, 

● Flexible analog I/O and digital output, including two 

● AC adaptor included

------------------------------------------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------------------------------------------------------------

AC or battery power, take your choice. The M-10MX comes with an AC
adaptor, but it can also operate on battery power (four AA batteries).
Thanks to its compact body and battery operation, the M-10MX is
an excellent tool for location video and/or field recording, live mixing,
and even podcasting with the EDIROL R-09.

------------------------------------------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------------------------------------------------------------

Connect a wide range of audio devices to the M-10MX, including
dynamic microphones, musical instruments, consumer audio
devices, video equipment, and audio interfaces for computer audio.
The M-10MX’s versatile back panel offers 1/4” and RCA input and
output ports, plus a dedicated plug-in powered, stereo electret 
condenser microphone jack, suitable for use with mics such as the
EDIROL CS-15. For outputs, two TRS impedance balanced 1/4”
phone jacks are provided.

------------------------------------------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------------------------------------------------------------

The M-10MX is equipped with both coaxial and optical S/PDIF 
24-bit/96kHz digital audio outputs, which means you can connect it
directly to the S/PDIF digital input of any audio interface, such as the
EDIROL UA or FA-series units for recording and mixing entirely in
the digital domain. The M-10MX can also be connected digitally to
studio monitors such as the EDIROL MA-series or Roland DS-series
powered monitors.

------------------------------------------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------------------------------------------------------------

Based on the same high-resolution processing engine as the flagship
M-16DX, the M-10DX provides full 24-bit/96kHz processing for the
ultimate in transparent digital mixing. Mixing is made simple, with
dedicated channel controls for 3-Band EQ, Pan, Aux, Select, and
Level.

------------------------------------------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------------------------------------------------------------

For maximum portability, the M-10DX condenses almost all of the
M-16DX’s functions into a compact tabletop package for easy
portability and use anywhere. It even retains the backlit LCD from
its big brother, so you can see the effects in operation as well a
graphical spectrum analysis.

■ Number of Channels 

10 in 2 out 

■ AD Conversion 

Sample Rate: 44.1/48.0/96.0 kHz, Signal Processing:

24 bits 

■ Frequency Response 

96.0 kHz: 20 Hz to 40 kHz (+1/-2 dB), 48.0 kHz: 20 Hz to 22 kHz (+1/-2 dB),

44.1 kHz: 20 Hz to 20 kHz (+1/-2 dB) 

■ Residual Noise Level 

-86 dBu (IHF-A, typ.) 

■ Nominal Input Level

Input Jacks 1-6: -50 to +4 dBu, Input Jacks 1-2: -40 to +10 dBu, Input Jacks 5-10: -2 dBu * Maximum input level:
Nominal input level + 12 dB 

■ Nominal Output Level 

-2 dBu * Maximum output level: +10 dBu 

■ Connectors

Input Jacks 1-6 (1/4 inch phone type, unbalanced), Input Jacks 1-2 (Stereo miniature type, plug-in powered),
Input Jacks 5-10 (RCA pin type), Main Output Jacks L, R (1/4 inch TRS phone type (impedance balanced),

RCA pin type), DC IN (AC adaptor) Jack, Digital Output Connectors (Optical type, Coaxial type), Headphone
Jack (Stereo miniature type) 

■ Power Supply 

DC 9 V (AC adaptor), Alkaline dry battery LR6 (AA) type x 4

■ Current Draw 

250 mA * Expected battery life under continuous use: Alkaline: 6 hours (Power save mode:

On), 4 hours (Power save mode: Off), These figures will vary depending on the actual conditions of use. 

■

181.2 (W) x 107.5 (D) x 54.0 (H) mm/ 7-3/16 (W) x 4-1/4 (D) x 2-1/8 (H) inches 

■ Weight 

393

g / 14 oz 

■ Accessories 

Owner’s Manual, AC Adaptor, Ferrite Core

* 0 dBu= 0.775 Vrms

* The specifications are subject to change without notice.

■ Number of Channels 

10 

■ AD/DA Conversion 

Sample Rate: 44.1/48.0/96.0 kHz, Signal Processing: 24

bits 

■ Frequency Response 

96.0 kHz: 20 Hz to 40 kHz (+3/-3 dB), 48.0 kHz: 20 Hz to 22 kHz (+3/-3 dB),

44.1 kHz: 20 Hz to 20 kHz (+3/-3 dB) 

■ Nominal Input Level 

Mic Input Jacks 1–2: -60 to -10 dBu, Input Jacks

1–2: -40 to +10 dBu, Input Jacks 3–8: 0 dBu, Input Jacks 9–10 (RCA pin type): -10 dBu 

■ Nominal Output

Main Output Jack / AUX Send Jack: +0 dBu, 2-Track Output Jack L–R: -10 dBu, *Maximum output level

: Nominal Output Level + 22 dB 

■ Output Impedance 

Main Output Jack / AUX Send Jack: 600 

Ω

, 2-Track

Output Jack L–R: 1 k

Ω

■ Recommended Load Impedance 

10 k

Ω

or greater 

■ Display 

Graphic LCD 122

x 32 dot (with back-light) 

■ Connectors 

Mic Input Jacks 1–2: XLR type (balanced / phantom power +48 V),

Input Jacks 1–8: 1/4 inch TRS phone type (balanced), Input Jacks 9–10: RCA pin type, Digital Output

Connector: Optical type, Coaxial type, Headphones Jack: Stereo 1/4 inch phone type, Main Output Jack L–R:
1/4 inch TRS phone type (Impedance balanced), Control Room Output Jack L–R: 1/4 inch phone type
(Impedance balanced), AUX Send Jack: 1/4 inch TRS phone type (Impedance balanced) 

■ DSP processing

Room Acoustic Control (Built-in Microphone), Finalize: Enhancer/Multi-band Compressor-Limiter, Insertion
effects: Power compressor/Vocal enhancer/Narration enhancer, Reverb/Echo: Echo/Space echo/Room
reverb/Small hall reverb/Large hall reverb 

■ Power Supply 

DC 9 V (AC adaptor) 

■ Phantom Power 

+48 V

/ 5 mA (each input) 

■ Dimensions 

198.6 (W) x 262.2 (D) x 60.9 (H) mm/ 7-7/8 (W) x 10-3/8 (D) x 2-7/16 (H)

inches 

■ Weight 

1.3 kg / 2 lbs 14 oz 

■ Accessories 

Owner's Manual, AC Adaptor

* 0 dBu= 0.775 Vrms

* The specifications are subject to change without notice.

● Compact and portable, perfect for mobile/field use

● Wide range of analog inputs and outputs, including 

● 24-bit/96kHz S/PDIF coaxial and optical outputs

● Battery or AC power (AC adaptor included)

■ Rear Panel