omnitron-systems-technolo 10-100m2 User Manual
3.4.4
Access the 10/100M2 Remotely
Remote access to the 10/100M2 is provided via SNMP, Telnet, FTP or an external serial modem connected
to the Serial Console Port.
to the Serial Console Port.
3.4.4.1
Accessing the 10/100M2 via NetOutlook (SNMP)
The 10/100M2 module can be remotely accessed by SNMP-client software such as NetOutlook
or third-
party SNMP management software. See Setting SNMP Preferences Section 3.4.2, on how to configure the
required parameters.
required parameters.
NetOutlook Chassis View and Trap Log Screens
3.4.4.2
Accessing the 10/100M2 via Telnet
The 10/100M2 is shipped from the factory with Telnet enabled. The default Telnet password is “public”. It
is highly recommended that the network administrator set a new Telnet password in order to prevent
unauthorized access to the unit. Telnet configuration parameters are available from the IP and Control
Preferences screen, option 6.
is highly recommended that the network administrator set a new Telnet password in order to prevent
unauthorized access to the unit. Telnet configuration parameters are available from the IP and Control
Preferences screen, option 6.
Page 20