Mercedes Benz 2002 c 32 amg User Manual

Page of 406
142
Engine oil level indicator
Technical
data
Instruments 
and controls
Operation
Driving
Instrument 
cluster display
Practical hints
Car care
Index
One of the following messages will subsequently appear 
on the indicator:
“ENGINE OIL LEVEL – O.K.”
No oil needs to be added.
“ENGINE OIL LEVEL – ADD 1.0 QUART”
(Canada: 1.0 L)
“ENGINE OIL LEVEL – ADD 1.5 QUART”
(Canada: 1.5 L)
“ENGINE OIL LEVEL – ADD 2.0 QUART”
(Canada: 2.0 L)
See “Adding engine oil level”, on page 321 for 
instructions on adding engine oil.
“ENGINE OIL LEVEL – REDUCE OIL LEVEL”
Do not overfill the engine.
Excessive oil must be siphoned or drained off. It could 
cause damage to the engine and catalytic converter not 
covered by the Mercedes-Benz Limited Warranty.
The “MEASURING NOT POSSIBLE” message will be 
displayed if a proper oil level check cannot be 
performed. The engine oil level check can be repeated 
after a short while.
Notes:
See malfunction and warning messages on page 293 
and page 303 if an engine oil level indicator appears on 
the multifunction display when the engine is running.
The engine oil level cannot be checked while the engine 
is running. The “ENGINE OIL LEVEL – NOT WHEN 
ENGINE ON” message will appear.
Engine oil consumption
Engine oil consumption checks should only be made 
after the break-in period. During the break-in period, 
higher oil consumption may be noticed and is normal. 
Frequent driving at high engine speeds results in 
increased consumption.
OM_203.book
  Seite 142  Donnerstag, 31. Mai 2001  11:57 11