Mercedes Benz 2002 c 32 amg User Manual

Page of 406
340
Tires, Wheels
Technical
data
Instruments 
and controls
Operation
Driving
Instrument 
cluster display
Practical hints
Car care
Index
11. Remove air pump from storage compartment inside 
trunk.
12. Pull out air hose with pressure gauge (5) and 
electrical plug (6).
13. Screw filler hose (5) onto tire valve.
14. Plug air pump electrical plug (6) into vehicle cigar 
lighter.
15. To switch on air pump, turn key in steering lock to 
position 1.
Note:
After 5 minutes, pressure gauge must display 
26 psi (1.8 bar). Do not exceed the maximum pressure 
of 36 psi (2.5 bar)!
If pressure is not attained, drive vehicle 
approx. 394 in (10 m), so that the sealing material is 
evenly distributed inside the tire. Reconnect air pump 
and inflate tire.
Note:
Do not operate electric air pump longer that 6 minutes 
without interruption. Air pump could overheat! After air 
pump has cooled off, operate air pump again.
16. To switch off air pump, turn key in steering lock to 
position 0.
17. Reinstall valve tire cap.
18. Drive vehicle to distribute the sealant evenly inside 
the tire.
Warning!
If a tire pressure of 26 psi (1.8 bar) is not attained, 
tire is too severely damaged for TIREFIT to provide 
a reliable tire repair.
In this case TIREFIT can not properly seal the tire.
Do not drive the vehicle.
Contact the nearest Mercedes-Benz Center or call 
Roadside Assistance.
OM_203.book
  Seite 340  Donnerstag, 31. Mai 2001  11:57 11