Mercedes Benz 2002 c 32 amg User Manual

Page of 406
33
Central locking system
Technical
data
Instruments 
and controls
Operation
Driving
Instrument 
cluster display
Practical hints
Car care
Index
Locking and unlocking with remote control
Unlocking:
Press transmit button 
Œ. All turn signal lamps blink 
once to indicate that the vehicle is unlocked.
The remote control can be programmed for two kinds of 
unlocking modes (see below):
Selective unlocking mode –
Press transmit button 
Œ once to unlock driver’s door 
and fuel filler flap.
Press transmit button 
Œ twice to unlock all doors, 
fuel filler flap, and trunk.
Global unlocking mode –
Press transmit button 
Œ once to unlock all doors, 
fuel filler flap, and trunk.
Notes:
If the trunk was previously locked separately, it will 
remain locked, see page 41.
The presently active unlocking mode (selective or 
global) can only be determined by unlocking the vehicle 
with the remote control (see below for changing mode).
If within 40 seconds of unlocking with the remote 
control, neither door or trunk is opened, the electronic 
key is not inserted in the starter switch, or the central 
locking switch is not activated, the vehicle will 
automatically lock.
Locking:
Press transmit button 
‹ once. All turn signal lamps 
blink three times to indicate that the vehicle is locked. If 
they do not blink three times, a door or trunk is not 
properly closed.
Note:
If the vehicle cannot be locked or unlocked by pressing 
the transmit button, then it may be necessary to change 
the batteries in the electronic key (if ok, battery check 
lamp in electronic key will light briefly when pressing 
transmit button) or to synchronize the remote control, 
see pages 357 and 359.
Choosing global or selective mode on remote control
Press and hold transmit buttons
‹ and Œ 
simultaneously for five seconds to reprogram the 
remote control. Battery check lamp will blink two times 
indicating the completed mode change.
OM_203.book
  Seite 33  Donnerstag, 31. Mai 2001  11:57 11